Free sample environmental stainless steel self brazing filler metal soldering

详情

Environmental stainless steel self brazing filler metal soldering

Features:
Environmental stainless steel automatic soldering materials
Alloy system of Sn-Ag-rare earth was composed of quaternary alloy, melt temperature range of **0 to **0 degree, and can produce wire materials of 1.0 to 3.0 diameters, itself strength is in **0Mpa to **0Mpa. And the wire diameter is changeable according to the different degree of hardness during processing.
Products performance
JH***4BXG soldering materials, chosen the way of heating with flame and high frequency sense light, has good spread ability on surface of stainless steel; and great caulking performance when overlapping joint of the thin wall of stainless steel. For the solder melting temperature is lower than **0 0C, far lower than the melt point of universal high silver solder, of which, melt point **0 0C or so. Therefore, there is no stainless steel-self soften phenomenon during brazing, and avoid of stress brazing produced and crack existed; enhanced gas proofness.
Model: JH***4BXG-P, JH***4BXG-G
Ingredient: Sn Al Ag Rera earth, etc.
Solidus:      **0
Liquidus:      **0
Specification:  1.6,  2.0 ;  2KG/Roll , 5KG/Roll
Shape: Strip,Ring,Roll,Paste
Scope:                 JH****4BXG-P Using for brazing joint of general stainless steel tube
JH****4BXG-G Using for brazing joint of **6L, **4L stainless steel tube
Brazing Method: Manual flame brazing, automatic flame brazing , high frequency brazing
Anti-corrsion Test: Qualified at more than **0hrs salt spray test
Joint Strength:       1.2 times of parent materials strength
Note: 1. Brazing gap not too tight
 2.The thickness of stainless steel wall less than 0.8mm
 3.Not move welded parts after brazing, and let it natural cooing for 1 minute.
Free sample