详情
FEATURES:
1. this chili milling machine is
Chinese patent product; it has the high milling efficiency with
lower power consumption, which can grind the pepper into *0 meshes to **0 meshes (finess).This
chili milling machine is different from other general milling
machine, it’s specially designed for grinding chili peppers into
chili powder with four rollers instead of two rollers. So in the
same power consumption circumstances, its output is 2 times more
than other general mill machine.
2.timing belt drive special design
without lubricating oil, which has wonderful mute effect &
more stable performance, and no pollutions to the final
materials.
3. the round sieve built in the main
body, which has 2 times longer than general sieve. It has perfect
performance, not easy to be blocked, even if there is slightly
blockage, the blockage can be cleared up during running.
4. the sieve cloth and sieve frame
assemble together, which saves much time to change the sieve
cloth. So it is convient for customer to produce different meshes
powder.
5. this machine has high degree
automation with low running cost, which save many labors and
power for customers.
6. standard barometer design has digital control to the rollers'
gap, which protect the rollers effectively, and increase the
powder output simultaneously.
Main Technical Parameters
for BCH single grinder:
1.Output: process **0kg per hour (*0 meshes).
The total power: *7.5
KW, the voltage: **0V, *0HZ; Weight: about 1.6t;
Bulk: about 7 m3;
Workshop Size: It needs a workshop;
the length of the workshop is around 5m.The span is around 3.5m,
the height is 3.5m.
Man power requirement: **2
persons.
2.Work Theories and Usage:
The 2 pairs of rollers will press
and shear to the raw materials, which will get to the final
powder goal. The materials discharged from the rollers will enter
to the prolonged cylinder to sift. The qualified mesh powder will
be packed, and the unqualified powder will be sent to the roller
again by the auger automatically.
About Installation:
3.Installed the mill body (inlays 2
pair of rollers) on the bottom case, and then put the transparent
hopper on the top. Fix the cone hopper under the bottom of the
mill body, and then connect the pipe and cyclone. Put the wind
stopping device under the cyclone, the under month of the wind
stopping device will connect with the inlet of the cylinder
sieve. Then put the cylinder sieve connect with the auger cone
hoper, and put the auger upper hopper connect with the cone
hopper.
Single Grinder Components:
|
Model & Items
|
|
Bottom Case
|
|
Mill body
|
|
hopper
|
|
Cyclone & pipe
|
|
Cylinder/ round sieve
|
|
motor
|
4.Preventive
Maintenance：
Keep hands out off the rollers.
The rollers are not allowed to contact directly.
Overloaded running prohibited.
If there were too low powder yield, please check if the cylinder
sieve were blocked or not. You can use the brushes to clear if
the sieve was blocked.
