Fusion Splicer KL-300T

详情

Features Core to core alignment by PAS technology ( PAS:Profile Alignment System) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single X or Y view and X & Y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch TFT color LCD monitor with clear digital image display USB & VGA interface Software upgrade via USB interface Specefications Model KL***0T Applicable fibers SM (ITU-T G.**2), MM (ITU-T G.**1), DS (ITU-T G.**3), NZDS (ITU-T G.**5) Fiber cleaved length 8~*6mm（Coating diameter：**0µm） *6mm（Coating diameter: **0 ~ ***0µm） Fiber diameter Cladding diameter：*0 ~**0µm Coating diameter：**0~ ***0μm Fiber Count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.*2dB （SM）, 0.*1dB (MM), 0.*4dB (DS), 0.*4dB( NZDS) Splicing time Typical 9 sec，with standard SM fiber Splicing mode *3(templet), *0(user) Splice loss estimate More accurate Return loss ＞*0dB Storage of splice result ***0 results，*0 parameter per result Fiber display and magnification **0X（X or Y view）, **0X（X and Y view） Tube heating time Typical *0 sec Tube heating mode 9(templet), *4(user) Tube heating temperature Can be adjusted Applicable Protection sleeve length *0mm, *0mm and a series of micro sleeves Tension test 2N Electrode life ***0 ***** splice/heating with battery Typical **0 cycles (splice/tube heat) with inner Li-battery Display screen 5.6 TFT inch color LCD monitor Image change over The fiber image is turned upside down Terminals USB 1.1 and VGA Operating condition 0 ~ ***0m above sea level, 0 ~ *5%RH and **0～*0℃, respectively, Max. wind velocity of *5m/s Power supply AC ******0V with AC adapter; inner Li-battery(***0mAH) Dimensions **0mm(L) x**0mm (W) x**0mm (H) Weight 2.7 Kg excluding battery, 3.2 Kg including battery