离岸价格
获取最新报价450 ~ 600 USD / Ton ( Negotiable )
|20 Ton Minimum Order
国家:
China
型号:
0-1mm
离岸价格:
450 ~ 600 USD / Ton ( Negotiable )获取最新报价
位置:
China
最小订单价格:
450 per Ton
最小订单:
20 Ton
包装细节:
25kg, 50kg , Tbag, etc
交货时间:
45working days
供应能力:
2000 Ton per Month
付款方式:
T/T, L/C, D/P, Western Union, Money Gram, PayPal, Other
產品組 :
-
联系人 Aaron
Qingdao Shandong, Qingdao, Shandong
ˎ ̥ 1, as refractory materials: graphite and its products with high
temperature, high strength properties, in the metallurgical
industry in main used to make graphite crucibles, commonly used in
steelmaking graphite as the ingot protectant, metallurgical furnace
lining. 2, be conductive material: at the electric industry used to
make electrode, the brush, the carbon rods, carbon nanotubes,
mercury is the flow of positive, graphite gaskets, phone parts, the
television screen coating etc. 3, as wear-resisting lubrication
materials: graphite in mechanical industry commonly as a lubricant.
Oil often cannot at high speed, high temperature and high pressure
conditions used, and the graphite wear-resistant materials can be
in (a) **0 ~ ***0 ℃ temperature in high speed of sliding, need not
lubricating oil. Many conveying of corrosive medium equipment
widely used graphite material made the piston cup, seal and
bearing, they don't need to add lubricant during operation.
Graphite milk is also many metal processing (wire drawing, laguan)
good lubricant. 4, graphite good chemical stability. Through
special processing of graphite, has the corrosion resistance,
thermal conductivity, permeability low characteristic, is used to
make a large heat exchanger, the reaction tank, condensed device,
burning tower, absorption tower, cooler, heater, filters, pump
equipment. Widely used in petroleum chemical industry, wet
metallurgy, acid and alkali production, synthetic fiber, paper and
other industrial department, can save a lot of metal materials. 5,
for casting, FanSha, molding and high temperature metallurgical
materials: because of graphite thermal expansion coefficient of
small, and ability to urgent cold urgent hot change, can be used as
glass is the molds, use graphite black metal get after casting
dimension precision, and the surface is bright and clean
high-yield, not processed or make a little processing could be
used, thus saving a lot of metal. Hard alloy production and powder
metallurgy process, usually with graphite material made of press
mould and sintering in porcelain boat. Monocrystalline silicon
crystal growth crucible, regional refining containers, stents,
fixtures, induction heater is with high purity graphite and
processed. In addition graphite also for vacuum smelting of
graphite insulation board and the base, high temperature resistance
furnace tubes, rods, board, lattice elements such as tent.
国家: | China |
型号: | 0-1mm |
离岸价格: | 450 ~ 600 / Ton ( Negotiable ) 获取最新报价 |
位置: | China |
最小订单价格: | 450 per Ton |
最小订单: | 20 Ton |
包装细节: | 25kg, 50kg , Tbag, etc |
交货时间: | 45working days |
供应能力: | 2000 Ton per Month |
付款方式: | T/T, L/C, D/P, Western Union, Money Gram, PayPal, Other |
產品組 : | - |