GSM alarm and controller Data Logger RTU

Introduction

 

       The Q*6_RTU GSM/GPRS/EDGE Remote Monitoring& Remote Control System is a complete Remote Telemetry unit. It contains a GSM/GPRS/EDGE Modem and control circuitry. It is capable of controlling up to 2 Relay outputs and monitor 2 Digital s and 2 Analogue s.(Analogue support: Detect Water leaks, Monitoring Temperatures for out-of-range conditions, Monitor Humidity for Damaging High Humidity Levels and monitor fuel levels).

 

 

The Q*6_RTUGSM/GPRS/EDGE Remote Monitor &Remote Control System is operated by the sending of SMS and GPRS/EDGE. The GSM/GPRS/EDGE controller can be used as a remote telemetry system; users can directly control the output relays from a simple text message or GPRS. The controller can also be used as a remote monitoring system; the unit can automatically notify the user whenever the any s change state and s counter.

 

 

The Q*6_RTU is complete with extend function include DI/DO/AI by UART2, support back up battery and built-in Quad-Band Modem ***0/***0/**0/***0.

 

Features

   Monitors up to 2 Digital s&2 Analogue s

   2 Remote control outputs for switching applications

   Fast and easy installation

   Low set up and running costs

   No field programming required as it can be done by SMS

   Able to work in GMS mode/GPRS mode/EDGE mode

   Programmable low/high alarm points for each analogue

   Works with 4 - *0mA(default)/**5V based transducer

   Accept other kind of transducer - temperature /motion transducer etc.

   Reports on set point alarms and other triggers

   Up to *0 alarm time set point

   Support for get GPS location

 

 

  Interface

 

 

Power:  *2V (*2V**5V)

 

       Correspond Relay Specification

 

Communicate:   **5/**2 (Factory Default: **2)

 

              **5:       (A   B)

 

              **2:       (RX1       TX1        GND)

 

Digital Input:

 

              DI1:        (DI1+     DI*-)

 

              DI2:        (DI2+     DI*-)

 

Digital Output:

 

              DO1:      (DO1+    DO*-)

 

              DO2:      (DO2+    DO*-)

 

Analog Input:     Transmitter (temperature /water level / humidity/ pressure)

 

              Type:     Current (***0mA)

 

              AI1:        (AI1+      AI*-)

 

              AI2:        (AI2+      AI*-)

 

Indicator Light:

 

              GSM:     Device Register State

 

              ACT:      Reserve for customized

 

              NET:      Reserve for customized

 

              GPS:      Reserve for customized

SIM Card:     3V/1V8

 

 

 

Access Equipment:   Serial Port Equipment (Camera /PLC….)

 

              Reserve for customized

 

closed Enter your detailed requirements to receive an accurate quote