联系人 Ms. Lisa
Jiulong, Shijiazhuang, Hebei
Gypsum
Powder Production Line adopts German advanced
technology, Design capacity of annual output of *0,******0,**0
tons, desulfurization gypsum, phospho gypsum, natural gypsum
production line can produce. Gypsum powder production line
according to
customer needs, choose different
technology, with advanced technology research and development
design team, focus on technology upgrading. And obtained The
Chinese patent, in the leading position in the industry. Our
production line adopts advanced disassembly type, most of them is
assembled in our factory. Greatly shorten the installation
time.
Brief introduction of Gypsum powder production
line:
The crusher breaks the large-sized gypsum ore into small
particles smaller than *5mm, which are stored and transported into
the mill for grinding, and the raw gypsum powder that has been
ground to the required fineness. Then the product is sent to the
fluidized bed furnace through the powder classifier. Calcined, and
the rest is returned to the mill for regrinding until qualified.
Calcined qualified gypsum powder is sent to the clinker bin for
storage or sent to the product workshop for use.
The main working principle of the
fluidized furnace drying system: the main body of
the fluidized furnace is mainly composed of dense hot air pipes,
which pass through the high-temperature hot air pipes, exchange
heat with materials, and release heat to Gypsum materials. A Roots
fan is installed at the bottom of the fluidized furnace, and the
cold air is blown into the furnace body through the air
distribution plate, and the powder in the furnace body is blown to
a boiling state. Flowing to the discharge port, the quality of the
Gypsum powder produced in this way is stable, and the crystal water
content and initial and final setting time are relatively easy to
control.
| SPECIFICATIONS OF THE GYPSUM POWDER MACHINE | |||
| Capacity Per Year | Capacity Per Hour | Gypsum Rock Consumption Per Year | Calcinor Dimension |
| *0,**0 tons | 2.7 tons | ****0 tons | 4.5 x 1.0 x 1.2 m |
| *0,**0 tons | 4.2 tons | ****0 tons | 4.5 x 1.2 x 1.4 m |
| *0,**0 tons | 6.9 tons | ****0 tons | 4.5 x 1.4 x 1.6 m |
| *0,**0 tons | 8.3 tons | ****0 tons | 4.5 x 1.6 x 1.8 m |
| **0,**0 tons | *3.*8 tons | *****0 tons | 4.5 x 2.0 x 2.2 m |
| **0,**0 tons | *0.*3 tons | *****0 tons | 4.5 x 2.2 x 2.4 m |
| **0,**0 tons | *7.*7 tons | *****0 tons | 4.5 x 2.4 x 2.6 m |
| Raw Material |
Natural ore(Gypsum
rock); Powder plant by-products(waste) desulfurization Gypsum, Dephosphorization Gypsum |
| Calcination System |
1. Using boiling furnace to
calcine; 2. Adopting heat conductive oil furnace as heat source. |
| Product Quality | In conformity with standard of P.R.C GB/T********8 paper-covered Plasterboard. |
| Fuel Variety | Coal, fuel oil, natural gas, or liquefied petroleum gas. |
|
The output of the Gypsum powder producing
line (Standard of our factory ) |
from ****0T******0T per year |
| 国家: | China |
| 型号: | XY-002 |
| 离岸价格: | 35000 ~ 50000 / Set ( Negotiable ) 获取最新报价 |
| 位置: | Tianjin |
| 最小订单价格: | 35000 per Set |
| 最小订单: | 1 Set |
| 包装细节: | nude |
| 交货时间: | About 45days-60days |
| 供应能力: | - |
| 付款方式: | T/T, L/C |
| 產品組 : | Gypsum Powder production line |
