离岸价格
获取最新报价800 ~ 1350 / Metric Ton ( Negotiable )
|10 Metric Ton Minimum Order
国家:
China
型号:
-
离岸价格:
800 ~ 1350 / Metric Ton ( Negotiable )获取最新报价
位置:
-
最小订单价格:
800 per Metric Ton
最小订单:
10 Metric Ton
包装细节:
According to customer's request
交货时间:
Within 7-15days after receiving deposit
供应能力:
500 Metric Ton per Month
付款方式:
L/C, T/T
產品組 :
联系人 Sales1
No.9 Ruijin road, Licang district, Qingdao, Shandong
HDPE High Density Polyethylene
1.Introduction
HDPE has several properties that make it ideal as a packaging and manufacturing product. Its stronger than standard polyethylene, acts as an effective barrier against moisture and remains solid at room temperature. It resists insects, rot and other chemicals. It is easily recyclable and can be used again and again. Recycled HDPE creates no harmful emissions during its production or during its use by the consumer. Also, HDPE leaks no toxic chemicals into the soil or water.
HDPE is one of the most commonly used plastics in the world. It is typically found in milk jugs, plastic bags and refillable plastic bottles. In addition to plastic lumber and recycled plastic furniture, recycled HDPE is used to manufacture lawn and garden products, buckets, crates, office products and automobile parts.
2.Grade
HDPE pipe grade can be used in the production of pressure pipes, such as pressurized water pipes, fuel gas pipelines and other industrial pipes.
HDPE Injection grade, red, blue, green,
HDPE Blow grade, white, grey, black
HDPE Pipe Grade black pellet
HDPE coating grade
And So On
3.Specification
HDPE cable material Property |
Typical Value |
|
Mass density g/cm 3 |
0.941-0.959 |
|
Melt flow Rate(190 centidegree /2.16kg)g/10min |
≤1.0 |
|
Tensile yield strength MPa |
≥19.0 |
|
Flexural modulus Mpa |
≥965 |
|
*@******************** |
≥400 |
|
Impact Embrittlement temperature centidegree |
MAX -118 |
|
Dielectric Constant |
100KHZ |
2.32 |
1MHZ |
2.31 |
|
Loss Tangent |
100KHZ |
MAX 0.0001 |
1MHZ |
MAX 0.0001 |
|
Volume resistivity OHM-CM |
MIN 1x10 15 |
4.Products Properties
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 °C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
5.Storage:
Shelf life: It should avoid damp, contaminated and direct sun
light during transport.And should be stored in ventilated and dry
place. Do not put it with flammable and corrosive substances
together,and away from the fire.
国家: | China |
型号: | - |
离岸价格: | 800 ~ 1350 / Metric Ton ( Negotiable ) 获取最新报价 |
位置: | - |
最小订单价格: | 800 per Metric Ton |
最小订单: | 10 Metric Ton |
包装细节: | According to customer's request |
交货时间: | Within 7-15days after receiving deposit |
供应能力: | 500 Metric Ton per Month |
付款方式: | L/C, T/T |
產品組 : | plastic raw materials |