High quality 1.0MM Copper Body ST-6 Automatic Spray Gun

详情

HQ 2.0MM Copper Body ST-6 Auto Spray Gun

Nozzle Size:1.3mm
Application: LOW COST HIGH PRESSURE (Pattern: Fan & Round)
Air Pressure: 0.29Mpa/3.0bar
Air Consumption: 100L/minPaint Flow:360ml/min
Paint Width: 350mm

Nozzle Size:2.0mm
Application:LOW COST LOW PRESSURE ECO-FRIENDLY
Air Pressure: 0.29Mpa/3.0bar
Air Consumption: 140L/min
Paint Flow:600ml/min
Paint Width: 400mm

Weight (g) :300

Specifications:

How To USe:

A:Use Clean air filter through air dryer and air filter.

 If not,dirty air can cause painting failure .

 B:When you use ths gun for the first time after purchasing,adjust fluid needle packing set.

 Slowly tighten fluid packing seat and loosen a bit when fluid needle set does not return smoothly,and adjust so that fluid needle set smooth moves.

 C:If you use this gun for the first time after purchiang,clean fluid passages spraying thinner and remove rust preventive oil.

If not ,remaining preventive oil can cause painting failure such as fish eyes.

D:Firmly fix hose or container to spray gun

 If not ,disconnection of hose and drop of container can cause bodily injury.

How to Buy from US?

Connect with Mr.Tony 

Just click Contact Supplier ,leave message to me ,Sure within 24 hours i will give you reply .