Item specifics Certification: CE Brand Name: Saint Best
Machine Type: Glass Coating Machine Place of
Origin: China (Mainland),Shandong Model Number: SBT-HMA
Specifications
Hot Melt Applicator,Hot Melt Dispenser,Hot Melt Extruder
Machine,Hot Melt Machine,Hot Melt Coating Machine,Hot Melt
Sealing Robot
HOT MELT MACHINE,Hot Melt Dispenser,Hot Melt Applicator,
Item specifics
Certification: CEBrand Name: SAINT BESTMachine Type: Glass
Coating MachinePlace of Origin: China (Mainland),ShandongModel
Number: SBT-HMDB
Specifications
Machine Name
HMD-B HOT MELT MACHINE
General Description
HMD-B HOT MELT MACHINE is designed for the hot melt of
insulating glass with aluminum spacer. It is of the second
generation of equipment with the same model. It is small and
light, easy to operate and repair and has stable control over
temperature. Operation can be carried out after preheating of
half an hour.
Technical Index
Power Supply: Frequency: *0Hz
Voltage: three-phase five-wire system **0V
Total power: 5.5KW
Extruding Speed: above ***0g/min
Dimension (length × width × height): **0×**0×**0 (mm)
Total Weight: **0kg
Installation and Trial Run
a) No special conditions are required except that the operation
site is kept clean.
b) Make sure the power be connected correctly in accordance
with the requirements.
c) Put the designated rubber block in the rubber box, set the
temperature (reference degree being **0°C***0°C) and preheat it
for about *0 minutes.
d) When the set temperatures of the rubber and rubber pipe have
been satisfied, triggering the rubber gun can extrude the hot
melt.
Special Explanations
a) The extruding speed could be regulated, which is advised not
to be too fast in the beginning. In view of different
temperatures of different points in the hot melt when it is
first extruded, a small amount of extrusion is recommended
before formal extrusion is carried out.
b) The operation should not be conducted unless the rubber pump
reaches its set temperature. (Inside the machine, protective
setting is designed, so the motor will not work if set
temperature is not satisfied.)
c) The fluid rubber level should be kept above the heater by
adding the rubber blocks timely according to its
consumption.
d) The inclusion of foreign matter is strictly prohibited to
protect the machine.
e) After operation, leave enough rubber in the rubber box for
next heating and then turn off the power.
f) Hang the rubber gun on the slinger when it is not
used.
Note: Do not touch the gun mouth and the cover of the rubber
box to avoid injury.
HOT MELT MACHINE, Hot Melt Dispenser, Hot Melt Applicator, Hot
Melt Extruder,Hot Melt Extruder Machine, Hot Melt Sealant,Hot
Melt Adhesive Dispenser,Glass Coating Machine
Payment
TT/LC
Delivery
*5Days
Origin
China
Minimum Order
1Set
Packaging
Customized
Inspection
CE/ISO***1
Samples
Charge
Remarks
HOT MELT MACHINE, Hot Melt Dispenser, Hot Melt Applicator, Hot
Melt Extruder,Hot Melt Extruder Machine, Hot Melt Sealant,Hot
Melt Adhesive Dispenser,Glass Coating Machine