hot runner heater controller

离岸价格

获取最新报价

0 ~ 210 USD

1 Piece Minimum Order

国家:

China

型号:

016

离岸价格:

0 ~ 210 USD （面議）获取最新报价

位置:

China

最小订单价格:

最小订单:

1 Piece

包装细节:

strong carton

交货时间:

2 weeks

供应能力:

30000 Piece per Year

付款方式:

T/T

產品組 :

现在联系

查看手册

ANOLE INJECTION TECHNOLOGY CO., LTD

China

免费会员

联系人 Ms. Cherry

Xinqian, Taizhou, Zhejiang

现在联系

产品规格

color:silver
Enter attribute here - e.g. Color:Enter value here - e.g. Red
Enter attribute here - e.g. Color:Enter value here - e.g. Red
Enter attribute here - e.g. Color:Enter value here - e.g. Red
Enter attribute here - e.g. Color:Enter value here - e.g. Red
Enter attribute here - e.g. Color:Enter value here - e.g. Red
Enter attribute here - e.g. Color:Enter value here - e.g. Red
Enter attribute here - e.g. Color:Enter value here - e.g. Red
Enter attribute here - e.g. Color:Enter value here - e.g. Red
Enter attribute here - e.g. Color:Enter value here - e.g. Red

详情

Operate:

1. （1）Open power switch and turn into working condition preset by manufacturer.

（2）Press 【▲】【▼】to adjust temperature..

（3）Press 【SET】to check output percent..

（4）Press 【SET】to check output electricity.

（5）Press 【MODE】to switch automatic, manual and standby mode.

（6）Manual mode: press 【▲】【▼】to adjust output percent.

（7）Restore factory setting: press 【MODE】whilst holding the 【SET】to power off, reboot can restore factory setting.

（8）Automatic mode: operating mode in generally working condition, the controller control the temperature in accordance with setting temperature.

（9）Manual mode: in particular cases (such as thermocouple fault), can provide appropriately output setting to switch to manual mode and maintain equipments operation until correct the fault. Press 【MODE】one minute to start manual mode, press 【▲】【▼】to adjust output percent.

（*0）Soft start mode: A. Prevent the heater strip wetted, and the heater will be damaged by over electricity. The heater strip is dehumidifier by using soft start mode (dehumidifier) function in low voltage condition.

B. Test thermocouples and heaters in low electricity when starting up.

Menu setting: press 【MODE】twice, one minute per time and enter into standby mode, the standby indicator lights up. Then, press SET key to start menu setting.

（1）Menu set by user

l Press 【SET】to start menu.

l Press 【SET】parameter of the layer.

l Use 【▲】【▼】to switch parameters.

l Press【MODE】to save and log out menu when complete setting.

l The menu page is shown on PV screen; setting number is shown on SV screen.

PG1	Thermocouple type choice.
	press【▲】to choose J-type thermocouple, SV shows J. press【▼】 to choose K-type thermocouple, SV shows K. press【SET】to go to next page or press【MODE】to save and log out menu.
PG2	Set temperature unit.
	press【▲】to choose Celsius as temperature unit, SV shows C. press【▼】 to choose Fahrenheit as temperature unit, SV shows F press【SET】to go to next page or press【 MODE 】to save and log out menu
PG3	Set high temperature alarm.
	When temperature is higher than set, high temperature alarm will start, PV screen will show H I and sound alarm call. At the same time cut off output. press【▲】【▼】to set the number with **9. The factory value is 0. press【SET】to go to next page or press【 MODE 】to save and log out menu
PG4	Set low temperature alarm.
	When temperature is lower than set, low temperature alarm will start, PV screen will show L O and sound alarm call. At the same time cut off output. press【▲】【▼】 to set the number with **0. The factory value is 0.。 press【SET】to go to next page or press【 MODE 】to save and log out menu
PG5	Set soft start mode output time.
	press【▲】【▼】to set the soft start tome with **0min, factory value is 4 min . the actual temperature reach or over 3°C//**0°F, it will enter into【automatic mode】，soft start function won’t work any longer. Don’t change soft start mode ratio without special circumstances. press【SET】to go to next page or press【 MODE 】to save and log out menu

Wrong indication meter set factory value

No.	menu	Set value
1	Set thermocouple type	J
2	Set temperature unit	°C
3	Alarm buzzer	ON
4	High temperature alarm	*0°C
5	Low temperature alarm	**0°C
6	Soft start mode output time	4 minutes
7	Manual output percent

国家:	China
型号:	016
离岸价格:	0 ~ 210 （面議）获取最新报价
位置:	China
最小订单价格:	-
最小订单:	1 Piece
包装细节:	strong carton
交货时间:	2 weeks
供应能力:	30000 Piece per Year
付款方式:	T/T
產品組 :	-