KENNCOAT POLYURETHANE SELAER

TECHNICAL DATA

Colour : Grey, white and multiple colors Mixing mass density : 1.*8 kg/l
Mixing ratio(mass) : 5/1
Theoretical consumption rate:

1)Rolled rubber pad : 1.Layer **0 gr/m2 2.level **0 gr/ m2
2)Cast rubber applications : 1.level ***0 gr/m2 2.level ******0 gr/ m2 Note : Consumption rate depends on the roller rubber pad and the diameter of the rubber granules.
Curing period : **8 hours (*5°C)
Heat Resistance : Approx. **0°C (for cured product)
Shore A : *5 ±5
Application temperature : ****5°C
Application time : ****0 minutes (Depends on temperature and humidity)

APPLICATION CONDITIONS

Surface must be clean, dry, free from grease and oil. Surface should be free from moisture.

APPLICATION PROCEDURE

Mix 5 kgs of Component A and 1 kg Component B for two minutes with a low speed electric mixing paddle. It is important that two components mixed thoroughly. This mixture should be used in one application period(****5 minutes). (Depends on air temperature). Metal or plastic squeegee should be used. The surface must protect from water for ***0 hours.

SHELF LIFE

Shelf life is *2 months from the production date in appropiate conditions.

STORAGE

The product must be stored in sealed containers at ****5°C
Clean-up:All equipment should be cleaned with thinner, butyl acetate or ethyl acetate.

SAFETY DATA

Use protective goggles and gloves. Avoid contact with skin and eyes. Keep away from children. In case of skin contact, wash skin thoroughly with soap and plenty of water.

PACKAGING

*1 kgs tin Component A 4 kgs tin Component B