详情
ShenZhen Huiboxin Electronic
Co.Ltd.
Product instruction
manual
Description
This product has intelligent
detection device on the swim lap, it judges whether swimmers drown
or not by the time set before swimming. When the immersion time is
greater than the alarm time you set, it begins to trigger the
inflating device and inflate the air bag in the swimsuit, so as to
achieve the purpose of the user surfacing and out of
danger.
Notice: this product is only used
as a supplementary function of drowning first aid, can not be used
as a professional life-saving
equipment.
Schematic diagram
1.Power LED
2.*0 seconds set-up
3.*5 seconds set-up
4.*0 seconds set-up
5.Alarm LED lighter
6.Power cable
7.Gas cylinder / inflatable
system/inflatable device
8.Air bag
9.Air outlet
*0.Air nozzle
Function and operation
1.Boot
self-detection
Pressing the power
（diagram1）
for 3 seconds, the power
LED（diagram1）
and function
lighter(diagram2,diagram3,diagram4) flash out in turn. And 2
seconds later the power LED and one function indicator light are
working, prove that the product is qualified to be used. Otherwise
the product is not qualified to be used.
2.Alarm time
setting
There are three kinds of product
alarm time settings, *0 seconds(diagram2), *5 seconds(diagram3) and
*0 seconds(diagram4). Please choose according to the user's
age and diving time
Reminds: Please choose the alarm time according
to your own ability. Selection time greater than one's own ability
will guide the danger, and less than one's own ability will waste
the gas cylinder.
3.Alarm trigger
When the intelligent detection device
immersed beyond the set alarm time, the product triggers the
inflatable system(diagram7) within 0.1 seconds through the power
cable(diagram6). At the same time, the alarm LED(diagram5) is
flashing red. After the alarm is lifted, the machine needs to
be turned off manually to turn off the alarm lighter.
4.Inflatable
process
After the inflatable
system(diagram7) is triggered, the cylinder is inflated to the air
bag(diagram8) within 3 to 4 seconds.
5.Battery charge
display
When the power is less than *0%,
the power LED lighter(diagram1) turn to red (In normal mode
is green) , and continues to flicker.
6.Charge
display
This product is 5V voltage
charging, the power LED(diagram1) shows red light when
charging. Till electricity exceeds *5% LED lighter turns green.
Charge for 2 hours and work for *0 hours.
Reminds:This product is suitable for mobile
power supply, computer, adapter all 5V output power
supply.
7.Size
check
|
Size
|
Height (CM)
|
Weight (KG)
|
Waistline(CM)
|
Max weight(KG)
|
|
**0
|
******5
|
≦****5
|
*0
|
≦*5
|
|
**0
|
******5
|
≦****0
|
*2
|
≦*0
|
|
**0
|
******5
|
≦****0
|
*2
|
≦*0
|
|
**0
|
******5
|
≦****0
|
*6
|
≦*0
|
8.Waterproof level
: P*8
9.Replacement of the
gas cylinder
After inflated, empty the air from
the air outlet(diagram9). Open the zipper and twist the power cable
nut, jam the nut on the air nozzle(diagram*0) with a wrench, rotate
the gas cylinder(diagram7) and remove it, replace a new
one. Do not twist directly with a wrench, otherwise it is easy
to cause air nozzle loosening and air leakage.
Notice :After replacing the cylinder 3 times,
the product is recommended not to be used.
Packing list
|
Item NO.
|
Item Name
|
Quantity（PCS）
|
Remakes
|
|
1.
|
Swimming cap
|
1
|
|
|
2.
|
Swimwear
|
1
|
Coverall /swim trunk
|
|
3.
|
Product subject
|
1
|
|
|
4.
|
Inflatable system
|
1
|
|
|
5.
|
USB charger
|
1
|
|
|
6.
|
Power cable
|
1
|
3 segments
|
|
7
|
PVC packing bag
|
|
|
Wearing picture
Notes before use
1.Make sure the clothes are in good condition.
2.Check that the power cable is connected.
3.
Boot self-detection is working
well.
4.Make sure the power cable of
inflatable system is connected.
5.Check the air nozzle and the air
pipe is connected.
Attention when using
1.please leave the water within 2
hours when the airbag is inflated.
2.Please pay attention to the power
LED lighter after using it for *0 hours. The product needs to be
charged when the light is red.
3.Do not touch the surface of the
swimsuit with a sharp solid to prevent the air bag in the swimsuit
from being punctured.
4.Be sure to drain the air in the
airbag before replacing the cylinder, in case too much air left
from the last inflation causes the airbag to burst when it is used
for the second time.
Daily maintenance
1.Please rinse with water below
*0℃, suitable for hand washing, do not use washing
machine or hand wring.
2.Turn over when washing the
swimsuit. Do not bleach or use laundry products containing bleached
ingredients, such as washing powder, etc.
3.Place the swimsuit in a cool
place to dry after washing it, avoid direct sun exposure, in order
to maintain the elasticity and toughness of the
material.
4.Do not place the wet swimsuit in
unventilated places (such as plastic bags) or under high
temperatures to prevent discoloration and deterioration.
5.The detector on swim cap should
be dried after soaking in water to prevent rust from losing or
reducing its detection ability.
Add: B8, Nanyue Lianhe industrial
Zone, Longgang District, Shenzhen, China
Orange cheng
ShenZhen Huiboxin Electronic
Co.Ltd.
| 国家: |
China |
| 型号: |
HBX-85
|
| 离岸价格: |
38 ~ 45 / Piece （面議）
获取最新报价
|
| 位置: |
shenzhenï¼guangdongï¼China |
| 最小订单价格: |
38 per Piece |
| 最小订单: |
2 Piece |
| 包装细节: |
PVC waterproof bag |
| 交货时间: |
Delicery time:If the quantity lower than 500, 3days |
| 供应能力: |
2000 Piece per Week |
| 付款方式: |
T/T, D/P |
| 產品組 : |
life vest
|
