离岸价格
获取最新报价10.98 ~ 13.28 USD / Kilogram ( Negotiable )
|200 Kilogram Minimum Order
国家:
China
型号:
E-625 series
离岸价格:
10.98 ~ 13.28 USD / Kilogram ( Negotiable ) 获取最新报价
位置:
Shenzhen,China
最小订单价格:
10.98 per Kilogram
最小订单:
200 Kilogram
包装细节:
Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail
交货时间:
within 3 days after receiving the deposit
供应能力:
8000 Kilogram per Day
付款方式:
PayPal, Western Union, D/P, L/C, T/T
產品組 :
-
联系人 Mr. sabrina
pingdi street, Shenzhen, Guangdong
RTV liquid Silicone for Cake Mold,additon silicone rubber(platinum)
Description of RTV liquid Silicone for Cake Mold,additon silicone rubber(platinum)
E***5 addition molding silicone is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability. The
mixing ratio is 1:1,mainly be suitable for making molds application.
Applications of RTV liquid Silicone for Cake Mold,additon silicone rubber(platinum)
E***5 addition molding silicone could be mainly used for making concrete
Stones mold , jewelry mold , statue mold, artificial craft mold, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolatemold , cake mold , candy and any other FDA food product mold making,prototyping etc.
Advantage of RTV liquid Silicone for Cake Mold,additon silicone rubber(platinum)
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1)
*good fluidity easy for pouring operation ( in round ****0 cps )
Technique Data Sheet of E***5 addition cure silicone
|
Product |
E***5 |
|
Appearance |
Translucent |
|
Hardness(shore A) |
*5±2 |
|
Mix ratio(A:B) |
1:1 |
|
Viscocity(mPa.s) |
****0±***0 |
|
Tensile strength (kgf/cm2) |
*0±5 |
|
Tear-strength (kN/m) |
*8±2 |
|
Elongation(%) |
**0±*0 |
|
Pot life/working time (mins) |
****0 |
|
Curing time/setting time (hrs) |
**4hrs(*5°C) *****0mins(*0°C) |
|
Shrinkage rate (%) |
≤0.1 |
(Note: the hardness , color, curing time and operation time is adjustable)
Operation instruction of HY-E Series molding silicone:
1.Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1 and stir part A and part B evenly in **3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around **3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Notice:As our E-series silicone is platinum cure silicone , which is very easy to cause
cure inhibition , so pls do remember thoroughly clean the model and tool before
operation . Besides , pls avoid the liquid E-series silicone contact or mix with the
following material , otherwise the silicone wont be cured:
1. Liquid condensation silicone ( condensation silicone not completely cured or organic
tin compounds )
2 .Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4 .Pewter solder flux.
SHELF LIFE:***0 months when stored under *4°Cin original unopened packages.
PACKAGE:Packed in *0kg/pail**0kg/pail, **0kg/pail***0kg/pail.
For more information, pls feel free to contact Ms Hebbe
office no. :****************6
Mob: *****1*********4
Email: hyse(at)szrl(dot)net
| 国家: | China |
| 型号: | E-625 series |
| 离岸价格: | 10.98 ~ 13.28 / Kilogram ( Negotiable ) 获取最新报价 |
| 位置: | Shenzhen,China |
| 最小订单价格: | 10.98 per Kilogram |
| 最小订单: | 200 Kilogram |
| 包装细节: | Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail |
| 交货时间: | within 3 days after receiving the deposit |
| 供应能力: | 8000 Kilogram per Day |
| 付款方式: | PayPal, Western Union, D/P, L/C, T/T |
| 產品組 : | - |
