Live Line Connector CRLLC

详情

PRODUCT DESCRIPTION:

Life Line Connector is prouduct with wide range of application.It can be used to replace open pole mounted disconnectors,for connection on tension poles,as short-circuit connector,connection of branching network ,work under voltage and worker protection against accidental re-connection of disabled network.

LLC can be used with all kinds of conductors with range as in table above.When it's combined with isolated conductor on Tap side,then it complies with bird protection requirements and is considered as bird friendly connection.

LLC is constructed for voltage till *6kV and it can be used to connect two medium voltage networks by using CU or Al isolated conductor on tap side.

The connector can be re-used several times without damaging the wires.

Installation is thanks to low weight easy and fast with Live Line Stick.The guiding lug ensures the guilding of the main wire to the right position ,and the wire nut keep stable position on stick during closing and tightening the LLC.That guarantees perfect electrical contact and right positioning on the wire.Protection against accidental over-tightening is guaranteed by shear heads:

*8Nm of the lower screw,*0Nm for the ring.Even after the ring is teared off opening is possible thanks to the remaining hexagonal bolt-head screw.On tap side the tear head is calibrated for *3Nm.

Minimal maintenance needed:

only the tightening of the screws needs to be checked periodically.

Operating temperature is **0/**0 Celsius.

Life time expectation:*5years.

PRODUCT RANGE:
Tap and Main for bare,Cu,Al,*AlFe&ACSR.

CRLLC      Main:*****3mm2<=***0/*2  Tap:****5mm2=**0/*1

USED MATERIALS:

High strength Al alloy for body.Surface treated Al bolt with torque screw heads.

VARIANTS:

There's showed upwards in PRODUCT RANGE.

STORANGE AND TRANSPORT:

Not any specific requirements on storage.