LS708 Aviation Obstruction Light

详情

Applications
Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light.
 
Main functions and features

• Based on LED technology, low power consumption, and high efficiency with long life.
• Lamp housingPolycarbonate, with good anti-impact strength, thermal stability, fire resistant.
• Using glue to seal between base and light body in order to keep light waterproof ability.
• The base material is aluminum, light weight and corrosion resistance.
• Installation with G3/4 pipe, ease of mount.
• Electric circuit with EMC, enclosure with LED guards circuit to extend LED lifetime.
• Self-contained connection terminal with ground protection. Stainless steel wire is used to secure the unit against falling in operation, and ease of mount.
• Steady burning or flashing can be switched over.
• Built-in photocell can switch ON/OFF the light at dawn and dark(optional).
• Extremely Reliable — Major Maintenance Cost Saving.

• Check whether the supply voltage does comply with the rated voltage of the lamp (Pay attention to the polarity in case of DC voltage).
• Insert the power cable through the bottom of lamp holder, and connect them to the terminals in the base respectively.
• Connect the earth wire  to the earthing  terminals.
• Select the steady burning or flashing mode as required.
• Tighten the screws between lamp housing and base.
• Screw the lamp on the G3/4″( G1″) threaded pipe, which should be fixed on a smooth surface with enough mechanical strength. Or you can select our mounting bracket: PJ**5 and PJ**4.