magnetic contacts for roller door

详情

5C**5Z  SPECIFICATION

Product name: magnetic contacts for roller door
Approved:CE / FCC / RoHS
Contact type:NC*-Switch ON when magnet nearly
                     (NO / COM are available)

Operating gap:≥*0mm (Undisturbed test)
Max. switching voltage:**0V DC/AC
Max. switching current:0.5A
operating load:*0W
Working temperature:**0~*0ºC
Working life:>*****0 times
Connection type:**0mm armoured cable
Material:ZINC Alloy
Color:Silver 
Packaging:1 set/bag

Introduction:
Magnetic contact is widely used for alarm system(panel) to detect state of door. It consist of a reed switch part and a magnet part . When door closed, reed switch is effected by magnet and turn ON; when door open, reed switch is effected by magnet and turn OFF, trigger alarm.

Installation instruction
Surface/Roller shutter mounted shouled be fixed with screw or double faced tape.
Flush mounted should be fixed in the hole between the door and door frame.
Magnet part install on the edge of door, reed part install on the edge of door frame as close to magnet part as possible .
Wired reed part to alarm system (panel).

Warning
Do not knock reed part when mounting.
Magnetic contact should be used for doors/windows alarm only, please contact us for technical parameters confirming if used as a equipment switch.