联系人 licky
Shenzhen, Guangdong
Cell phone booster GSM series of AGC booster Support by
ALC feature
Provide
quick coverage solution for small signal weak & block
zones,reduce drop/off calls.
Compact size, low consumption, easy installation, great
cover.
max Cover about ***0 sqm without block or
obstruct.
Reduce cellphone transmit power and radiation, extend cellphone
battery life.
Low gain low noise figure, high linear design, low interfere- nce
to BTS.
With
ALC Gain and Power control
Cell phone booster GSM series of AGC booster Support by ALC
specification:
Specification |
uplink |
downlink |
|
Frequency :GSM**0mhz |
******5mhz |
******0mhz |
|
Max Gain |
****2dB |
****7dB |
|
Bandwidth |
*5MHZ |
||
Ripple in Band |
8dB |
||
Max. Input Power Without Damage |
0 dBm |
||
Output Power |
*4dBm |
*7dBm |
|
Noise Figure max. gain |
4.5db |
8db |
|
Return loss |
*8 dB |
||
Time Delay |
0.5 μs |
||
MTBF |
> ****0 hours |
||
Power Supply |
AC:*0~**5V, *0/ *0Hz;DC:5V 2A |
||
Power Consumption |
4W |
||
Impedance |
*0 Ω |
||
RF Connector |
N -Female |
||
Cooling |
Heatsink Convection cooling |
||
Dimensions (D x W xH ) |
**8***8**0(mm) |
||
Weight |
1.0KG |
||
Installation Type |
Wall Installation |
||
Environment Conditions |
IP*0 |
||
Humidity |
< *0% |
||
Operating Temperature |
**0°C ~ *5°C |
Cell phone booster GSM series of AGC booster Support by
ALCadjusting
illustration:
A Proper adjustment of the
antenna's position so that the best communication quality and
signal strength.
B Indoor antenna installed
location should stay away from one end of the outdoor antenna, so
as not to interfere with each other. (The outdoor antenna away
from the indoor antenna placed above a layer of floor is
better)
C Indoor antenna should be
installed above the height of 2 m of the ceiling or the
corner.
D Using the waterproof tape to
wrap where has connector, so as to avoid oxidation caused by
moisture, resulting in reduced indoor signal
coverage.
Cell phone booster GSM series of AGC booster Support by ALC, with the LED Indicators introduction
POWER |
LED be red after changed power-supply; repeater work normal. |
||
UL |
|
Only if there is mobile phone that be used ,the LED will be green, repeater work normal. |
|
DL |
When the repeater’s output power*0dBm,the LED won’t be light; repeater work normal.( if only use one piece of indoor antenna it may also work normal) |
||
When the repeater output power between *0dBm and *4dBm,LED be green,repeater work normal.; |
|||
When the repeater’s output power be *4dBm,with full use, LED be green and red, repeater work normal. with full use ,; |
|||
Phone calls |
When there is mobile phone using ; |
||
No phone calls |
When there is no mobile phone using; |
||
Self-excited |
When the LED be fully red , repeater will not work . |
Cell phone booster GSM series of AGC booster Support by
ALC, ST**0B
repeater complete set introduction :
Max
coverage can up to ***0square meters, Indoor max can use
with 3 pc omni antenna;
Outdoor
antenna can be yagi antenna, panel
antenna,
Indoor
antenna can be omni antenna, panel antenna and whip
antenna;
Cable
can be *5ohm*7 or *0 ohm*5 cable
国家: | China |
型号: | ST-GSM950B |
离岸价格: | ( Negotiable ) 获取最新报价 |
位置: | Guangdong |
最小订单价格: | - |
最小订单: | 1 Piece |
包装细节: | carton |
交货时间: | 1-3 working days against full payment |
供应能力: | 1000000 Piece per Month |
付款方式: | T/T, Western Union |
產品組 : | - |