Multifunctional High-Speed Particle Impact Testing Machine

详情

With lens or impact resistance test.
Directions for use:
1. Please note that the voltage of the machine, first of all, for a few volts (V), and then plug in the socket of the machine will find the same voltage.
2. Put pressure.
3. Will the nitrogen of high pressure adjustment valve is installed on the nitrogen cylinder, then the machine rear nitrogen of high pressure pipe joint in the nitrogen cylinder.
4. Open the power supply of the screen, the air pressure switch to 5 kg, after being zero in the screen.
A. choose high speed or low speed test:
If you would like to choose high speed:
1. Make sure good item 3 step of sudden movements.
2. The choice will be high or low speed switch to nitrogen test at a high speed.
3. Open the nitrogen.
4. Then the test pressure from the high pressure adjustment valve on the nitrogen cylinder, high pressure size, the panel
Speed adjustment pressure gauge.
5. If stop testing after nitrogen turn off, press launch again to nitrogen discharge.
B. if you would like to choose low speed:
1. The nitrogen gas off.
2. Press the launch , the machine is used in the rest of the nitrogen discharge.
(this is item 1 and 2 for high-speed switch at low speed until step step; if direct test slow step flash from item 3)
3. Then put the high low speed selector switch to air test at low speed. While pressure adjustment from the operation panel on the right side of the front
There is a low speed adjustment valve, pressure is low speed adjustment of the operation panel pressure gauge.
4. If stop testing after turn off the air, then launch will air out.
5. Open the laser switch, and then shot in the head shifts to the shooting point of the position, not let the ball hit when the speed,
Or head can be removed, and then adjust the required speed.
6. After adjusting the speed or test, the steel ball after taste, at this time of the laser light is not bright (on behalf of the steel ball has the tongue) to launch
The action.
7. The marbles into bullet hole, and then pull the tongue put his hand back to the end, put off the handle can be launched.
(the mental note: if the tongue is not exactly, cannot launch.)
(does because of security concerns, so shooting inside the door is equipped with a safety switch, so the door opened cannot projectiles
Bead. )
Can be tested after completion of the above actions of glasses, wearing a general to test people's head, and then adjust their are going to test
The location of. (the mental note: the electric wires to the barrel (optical fiber) heart is glass material, do not pull or distorted, or capacity
Easy to fracture, measuring speed. )
For EN**6 standard (for example)
Impact test requirements: eye protection
Products type: steel ball impact velocity
Low speed impact: ******3 ft/s
Medium speed: ******4 ft/s
High speed impact: ******0 ft feet per second