Original 60w Co2 Laser Power Supply 110V/220V

详情

Model: HY-T*0  for *0w,*0w,*0w Co2 Laser Tubes
Alias: Co2 Laser Generator,Co2 Laser Source,Co2 Laser Device
 
Main Features;
1) Good compatibility: It can be applicable to *0W,*0W and *0W laser tubes manufactured by different factories.
2)  Input Voltage: Its Input Voltage can be made to AC**0V or AC **0V.
3) You can choose Cutting Type or Sculpring Type; the Cutting Type has a good power stability and strong adaptability;the Sculpring Type has a quick response speed and good engraving effect.It can prolong laser tube's service life.
4) This Power Supply has theTEST which can test output laser manually.
  1) Easy Control: The start and stop of laser can be easily controlled by TTL level.Both **5V analog signal and 5V PWM signal can control the laser power.
2) The Laser Power Supply has output open circcuit protection.
3) This Laser power supply has TTL signal indication,water through signal indication and laser output indicaiton.

 
Specification

Input	Input Voltage	AC**0V or AC**0V（Please be specified when placing order）
	AC frequency	*7—**0HZ
	Max Input Voltage	**0W
	Max Input Current	3A
	Cold Surge Current	≤*0A(AC**0V Input)	≤*0A(AC**0 Input)
	Current Leakage	≤0.7mA(AC**0V Input)	≤0.4mA(AC**0V Input)
Output	Maximum Input Voltage	DC *5KV
	Maximum Output Current	DC *0mA
Efficiency	≥*0%  (full load)
Mean Time Between Failure (MTBF)	≥****0H
Response Speed	≤1ms(from the switch Signal is given to the output current up to *0% of the setting current)
Control Interface	TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Withstand Voltage	Input-Output, Input-Shell AC***0V *0mA *0S; Output negative is connected with machine shell.
Protection	can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell)
Environment	Operating Temperature: (**0~*0)°C,Relative Humidity (RH)≤*0%
Cooling Way	Force-Air Cooling (FAC)
Dimension	L×W×H=**7***4**7(mm)
Color	Black

 
Application
 
HY-T*0 Laser Power Supply is used for *0W,*0W,*0W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber,ect.
 
Technical Support
1) All our item is pass the ISO***1 and CE quality Certification.
2) We are the manufactor of the Co2 Laser Power Supply, and have strict quality control system,so that we can supply the best quality products with lowest prices for our client.
3)We have a professinal technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4) Manual testing: Make sure the power supply and laser tube wiring correct firstly, offline the control line and then press the red " TEST" to test laser tube out light or not, this method can be simple judgment power supply is working correctly.
 
Warranty: One year.
 
If the Laser Power Supply appeared problem during this period,we can send Free Pars for your repairing.
 

国家:	China
型号:	HY-T60
离岸价格:	78 ~ 95 / Set ( Negotiable ) （面議） 获取最新报价
位置:	Jinan,Shandong,China
最小订单价格:	78 per Set
最小订单:	1 Piece
包装细节:	PE foam inside carton box
交货时间:	within 3 days after your payment
供应能力:	500 Set per Week
付款方式:	PayPal, Money Gram, Western Union, D/P, D/A, L/C, T/T
產品組 :	-