联系人 Ms. Lana
wenfeng district, Anyang, Henan
Our
company using high quality raw materials to produce PE gas pipe,
with production of PE gas pipe pressure piping components necessary
for the production license of special equipment manufacturing
license, manufacture caliber de******0mm, reputation-based, improve
services,welcome to contact
us.
PE gas pipe
Features:
* Corrosion. Polyethylene is an inert material, except for a few
strong oxidant, can be resistant to a variety of aggressive
chemical media, no electrochemical corrosion, no coating.
* Does not leak. PE gas pipeline mainly welding connection (hot
melt connection or fused connection), compared with the rubber ring
type joints or other mechanical joints, is not dangerous because of
distortions caused by leaking joints exist.
* Good resistance to scratches capacity. Effective against
scratches caused by stress concentration in the material, may
greatly reduce the pipeline damage.
* High toughness. PE gas pipe is a high toughness pipe, its
elongation at break generally more than **0 percent, based on the
pipe's ability to adapt to uneven settlement is very strong. Is an
excellent seismic performance of the pipeline.
* Excellent flexibility. Flexible polyethylene PE gas pipe can make
the disk volume. Not slotted for construction, easy to PE gas
pipeline in accordance with the requirements of the construction
methods were changed.
* Advanced fused pipe structure. Non-exposed spiral heating wire to
ensure the weld zone uniform heat conduction, and effectively put
an end to the short circuit occurs when the pipe inserted into the
phenomenon, while avoiding an exposed electric wire prone to aging
corrosion defects and pipe inner wall smooth, easy to install .
* Good resistance to rapid crack pass. Rapid crack pipe refers
accidental crack in the pipeline, at a speed of several hundred
crack m / s growth, resulting in tens of meters or even a large
instantaneous km pipe rupture accident. Actual use has not yet
found a fast split polyethylene gas pipe.
* Long life, up to *0 years.
Physical Properties:
| Item | Typical Value | |||
| Thermal Stability | >*0 | |||
| Longitudinal Reversion | =3.5GJ/m2) | Still meet requirements of item 1,4 and 9 | ||
| Nominal diameter(mm) | The minimum wall thickness, en(min) | |
| SDR*1 | SDR*7.6 | |
| *0 | 3.0 | 2.3 |
| *5 | 3.0 | 2.3 |
| *2 | 3.0 | 2.3 |
| *0 | 3.7 | 2.3 |
| *0 | 4.6 | 2.9 |
| *3 | 5.8 | 3.6 |
| *5 | 6.8 | 4.3 |
| *0 | 8.2 | 5.2 |
| **0 | *0.0 | 6.3 |
| **5 | *1.4 | 7.1 |
| **0 | *2.7 | 8.0 |
| **0 | *4.6 | 9.1 |
| **0 | *6.4 | *0.3 |
| **0 | *8.2 | *1.4 |
| **5 | *0.5 | *2.8 |
| **0 | *2.7 | *4.2 |
| **0 | *5.4 | *5.9 |
| **5 | *8.6 | *7.9 |
| **5 | *2.3 | *0.2 |
| **0 | *6.4 | *2.8 |
| **0 | *0.9 | *5.6 |
| **0 | *5.5 | *8.4 |
| **0 | *0.9 | *1.9 |
| **0 | *7.3 | *5.8 |
| 国家: | China |
| 型号: | - |
| 离岸价格: | ( Negotiable ) 获取最新报价 |
| 位置: | - |
| 最小订单价格: | - |
| 最小订单: | 500 Meter |
| 包装细节: | Normal Exporting Port |
| 交货时间: | 15days |
| 供应能力: | - |
| 付款方式: | PayPal, D/P, L/C, T/T |
| 產品組 : | Polyethylene Pipe/tube |
