Plastering Additive

详情

Apply: 1 Prevent hollowing and peeling 2 Anti permeability and anti freezing 3 Anti cracking: Modify the performance of crisp and stiffness of the basic cement mortar to be with enough intensityflexibility and tension. Application: 1 Quantity: 0.2%*0.4% of the cements quantity, we will supply one standard **0g measure container. Use the machinery to agitate. 2 Vertical or Horizontal agitating process: Power+part sand+ +water(agitate)+cement+the surplus sand +water***5mins agitating. 3 Rolling agitating process: Put the mortar in the cements and sand, then agitate 1min without water, then add enough water and reagitate **5mins. 4 The agent should dissolve in the water first then put in the mortar if the workers to agitate. Reduce *0% water after mix the additive agent. attention: 1 The cement is R*2.5 *****, mid-sand, the second grade lime plaster. 2 The materials are different in different places, so the quantity of the mortar would change , the clients must test in advance , to find the best ratio. 3 Please follow the rule of GB****0< Decoration Construction Certification Standard >to paint. Application: 1 Quantity:0.2%*0.4% of the cements quantity, we will supply one standard **0g measure container .Use the machinery to agitate. 2 Vertical or Horizontal agitating process: power+part sand+water(agitate)+cement+the surplus sand +water***5mins agitating. 3 Rolling agitating process: put the mortar in the cements and sand, then agitate 1min without water, then add enough water and reagitate **5mins. 4 The agent should dissolve in the water first then put in the mortar if the workers to agitate. Reduce *0% water after mix the additive agent. Precaution: 1 Store in the dry and Ventilation place to prevent being wet. 2 Substrate: there are many concave or Convex parts on the blocks, concrete and air-entrainment concerte substrates, so you must make them leveling with cement mortar with 1:3 at first .If the surface