联系人 Suzhou
No.69 Xingwu Road, Wuzhong Economy Developement Zone, Suzhou, Jiangsu
| Advantage: |
●
The structure of
the equipment is simple, It does not need to land on the
ground, for which the operational process is simplified and
manpower is saved to facilitate the achievement of
automation ● After dried, The raw materials do not need to transport repeated, dust and other dirties are not easy to carry in, at the same time, the production quality is improved ● The residence time for raw materials in barrel is short, it isn't apt to change colors, but at the same time apt to detect and control water content of raw materials after drying. ● Saving energy, compare to heating oven, *0% ~ *5% energy can be saved ● After dully dried, the resin materials drop to molding machine with hot state, which can shorten the melting time of resin and increase the injection rate ● Stainless steel and aluminum alloy are used for manufacturing. keep raw material clean |
|||||
| Selection: |
Calculation can be in accordance with the
injection amount of molding machine per hour, and the loading
volume of the selected dryer should be slightly larger than
the following calculated value 1. Dryer loading volume = injection volume of molding machine per hour *drying time of raw material 2. Drying time as follows: Raw Material |
Drying Temperature | Drying Time | Raw Material | Drying Temperature | Drying Time |
| (℃) | (h) | (℃) | (h) | |||
| Polyethylene PE | ****0 | 1 | Polyformaldehyde | ****0 | 2 | |
| Polyethylene PP | ****0 | 1 | Polystyrene PS | ****0 | 2 | |
| ABS | ****0 | 2.5 | Polyvinyl Chloride PVC | ****0 | 1 | |
| Nylon | ****5 | 2.5 | Polycarbonate PC | ******0 | 3 |
If the raw material are often
changed in actual usage, then
the dryer loading volume=injection volume of molding machine per
hour *2.5 (h)
| 国家: | China |
| 型号: | SDG |
| 离岸价格: | 获取最新报价 |
| 位置: | - |
| 最小订单价格: | - |
| 最小订单: | - |
| 包装细节: | - |
| 交货时间: | - |
| 供应能力: | - |
| 付款方式: | - |
| 產品組 : | - |
