联系人 Mr. Andy
YU LONG, TAIPEI, TAIWAN
| Cylinder type sensing head size | M*8 |
|---|---|
| Type | Shielded |
| Sensing method | Inductive type |
| Sensing distance | 3 mm **0% to **0% |
| Setting distance | 0 to 5.6 mm |
| Differential distance | *0% Max. of sensing distance |
| Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
| Standard sensing object | Iron *8**8*1mm |
| Response frequency | 0.5 kHz (average) |
| Power supply voltage | *2 to *4 VDC (ripple(p-p) :*0% Max.) |
| Operating voltage range | *0 to *0 VDC |
| Leakage current | 0.8 mA Max. |
| Control output (Output type) | DC *-wire models with polarity |
| Control output (Switching capacity) | 3 to **0 mA |
| Control output (Residual voltage) | 3 V Max. （under load current with cable length of 2m） |
| Indicator | Operation indicator(red), Operation setting indicator(green) |
| Operation mode | NO |
| Protective circuit |
Surge suppressor Output short-cut protection |
| Standard or Different frequency | Standard |
| Ambient temperature |
Operating: **5 to *0 CEL Storage: **0 to *5 CEL (with no icing or condensation) |
| Ambient humidity |
Operating: *5 to *5 %RH Storage: *5 to *5 %RH (with no condensation) |
| Temperature influence |
***0% Max. of sensing distance in temperature range of **5 to
**0CEL (As the basis for sensing distance of *3CEL) |
| Voltage influence | **1% Max. of sensing distance in rated voltage range ***5%. (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | *0 M OHM Min. at **0VDC between charged parts and the case |
| Dielectric strength | ***0 VAC *0/*0 Hz for 1 minute between charged parts and the case |
| Vibration resistance | *0 to *5 Hz, 1.*-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | ***0m/s2 for *0 times each in X, Y, and Z directions |
| Degree of protection |
IEC****9: IP*7 Company standard: Oil-proof |
| Applicable standard (EC Directive (Low Voltage Directive)) |
EN******1 EN********2 |
| Applicable standard (EC Directive (EMC Directive)) |
EMI: EN********2 Emission Enclosure: CISPR*1 Group 1 class A EMS: EN********2 Immunity ESD: IEC********2 Immunity RF-interference: IEC********3 Immunity Conducted Disturbance: IEC********6 Immunity Burst: IEC********4 CE marking: Equipped |
| Applicable standard (CCC mark) | Not equipped |
| Connection method | Pre-wired models (Cable length: 5 m) |
| Weight (Packed state) | approx. **5 g |
| Material (case) | Brass nickel plating |
| Material (sensing surface) | PBT |
| Material (clamping nuts) | Brass nickel plating |
| Material (toothed washer) | Iron zinc plating |
| Accessories | Instruction manual |
| 国家: | Taiwan |
| 型号: | E2E-X3D1-N |
| 离岸价格: | 1 ~ 100 / Piece 获取最新报价 |
| 位置: | - |
| 最小订单价格: | 1 per Piece |
| 最小订单: | 1 Unit |
| 包装细节: | original package |
| 交货时间: | 2days after payment |
| 供应能力: | 50 Piece per Month |
| 付款方式: | T/T |
| 產品組 : | Proximity sensor |
