Reliable LED Flood Light that can replace 3500W Metal Halide Lamp

详情

Features:
The BTZ series has an upgraded casing in keeping with modern design .
Manufactured from high thermal conductivity magnesium alloy .
Light weight magnesium alloy to reduce static and inertia loads
Reduced surface area to reduced wind loading which enables it to be retrofit to existing poles without fear of exceeding maximum rated pole top wind shear
Carefully designed and rated cooling fins ensure thermal management by natural convection.
The matching of the driver and LED characteristics provides a genuine efficiacy of110lm/W and a very low decay of less than 3% over the first year of operation with a max 15% over 5 years
The robust cast metal work is also anti corrosion IP 65 and dust proof .
Now available in power ratings of 60W to 1000W as well as angles from 30o or 60o

Applications: 
High Mast Lighting for indoor/outdoor sporting fields, Harbor Container Terminals, offshore oil rig,
Road Lighting applications (Highway, Traffic Road and Pavement etc.) 
Industrial Lighting (Golf Course, Tennis Court & Stadium etc)

Advantages
1.The lowest total cost solution for good quality and reliable high power LED outdoor lights.
2. Industry-leading thermal management
3. Operating temperature range: from below40 Celsius degree to50 Celsius degree.
4.The LEDmodular contain no any mercury or lead, noUV rays.
5.Directional light means good easy lighting design with no light pollution, dark sky compliance.
6.Higher luminous efficacy compared to similar models of others.
7. Lighter and thinnercompared to similar models, lower the wind load even 35 meters high
8.Reduce energy costs up to 90% compared to traditional lamps
9.be able to operate in harsh high temperature, moist environments.
10. 3-5 years warranty andlong life expectancy,reduce maintenance costs up to 90%,
Parts are available so that they can be refurbished and not discarded at the end of the service life 


Easy Installation（Mounting type for example）

1. Wiring should be installed by a qualified electrician .The brown is active wire (L). The blue wire is neutral (N) The yellow/ green line corresponds to the connection in the earthling terminal. If it is necessary to connect on the outside ensure a waterproof junction box is used of more than IP65 waterproof function the installer is responsible for all terminals or waterproof connectors.
2. Drill 2 installation holes with 100mm distance on the specific location (10 mm diameter), push M8X80 expansion screw into hole, asin picture B1. Thread the power cord through installation brackets holes, then fix the bracket into the prepared expansion screws and locked it, as inpicture B2. Then turn on.

Lighting