详情

SSLT-ZJ****1 DC
Products Details
1) Artistic design & the kinds of colors for an LED base.
2) Long-range remote control distance.
3) Rechargeable Lithium-ion battery.
4) Charging cable/RJ/Tamper Alarm.
5) High-alarm volume.
6) RJ charge.
7) Remote-controlled PIN login.
8) Alarm-position indication.
9) Anti-forced demolition alarm system.

Product Features
1) Dimensions: *9.5 mm (length) by *2.5mm (width) by *7.5 mm (height).
2) Remote-control distance: 1 m.
3) Built-in battery: rechargeable Lithium-ion batteries.
4) Power port type: USB.
5) Maximum standby time: *0 days.
6) Alarm volume: *5 db.

Installation
1)Clean and dry the display table&wall surface
2)Switch on the power of ***1DCon the base, remove the plastic protection cover from ***1DCand paste the ***1DC on the clean table& wall.
3)Connect the ***1DCUSB plug to the 5V/2A/USB power adapter, insert the RJ plug into ***1DC RJ socket.
4)After connecting the 5V/2A/USB power adapter, the LED light will be shining. 
Switch on/off tips
 
How to switch on/off the alarm system:
1) Paste the sensor on the exhibition and make sure all the contactor is properly press down. After the charging cable connecting, it will a long bp Di voice. The red or green LED light from the base will be flashed 3 times then keep a long light.(external 5V power support), otherwise the red or green LED light will be twinkling every 8 seconds.
2) Switch off the alarm system, it will 3 times Di voice. And the red or green LED light turn off.
 
Alarm Tips
If alarm happened, red or green LED light twinkling fast, please check:
The base of ***1DC paste on the surface properly.
RJ plug insert into the socket correctly.
Sensor paste with the exhibition properly.
The charging cable for the exhibition being pull out or damaged.
 
External power on/off tips
It will be Di voice alert when connect on/ off with external 5V power
 
Low battery tips:
***1DC will standby about *0 days without external power connect it.
If every 8 seconds, there is a Di voice alert. That means it need recharging. Please connect with 5V power and keep charging for *4 hours.