RF 4 Channel LED RGBW Remote Controller

详情

RF 4 Channel LED RGBW Remote Controller
   Brightness Adjusting

 P/N: CRCT-RF**2

  1.     Technical Parameters(remote controller):

   1. Power supply: AAA battery×2pcs
   2. Cover material: ABS

  2.     Technical Parameters(controller):

     1.     Working voltage: DC*2V**4V
   2.     Output control: 4 circuits
   3.     Control current: 6A/circuit
   4.     Connection method: common anode
   5.     Dimension:L*5×W*5×H*2mm
   6.     Receiving range: *0meters
   7.     Working temperature: **0~*0 degrees
3.     How to use
 1.     Brightness adjusting:
 Remote A: to adjust all controllers, first press ”Master ON” or to adjust individual controllers, then press “Zone ON”; secondly set the adjustment for brightness
 Remote B: rotating the wheel from left to right, brightness up, form right to left, brightness down.Brightness: **0%*1%, *0 grades to adjust;
2.     Night light mode: for individual controllers, press and hold the “Zone OFF” form ne of the 4 Zones. For all controllers, press and hold “Master OFF”. The lights now consume only 0.4watts.
3.     Resume function: The previous settings will be resumed while power on again!
4.     Matching Code:Press one of the “Zone ON” s one time within 3 seconds when power on again, the light will blink 3 times if matching is successful;
5.  Clearing Code:Press one of the “Zone ON” s five times quickly within 3 seconds when power on again, the light will blink ten times if clearing is successful;
6. Grouping: You can add an endless numbers of controllers to a zone on the 4 channel remote by code-matching to different zones. This way you are completely flexible in creating different group combinations. Below you can see some grouping examples.
7.      Caution: one controller can connect with up to four different remotes.