详情
Steel Bar Welded Wire Mesh /cold roll with rib reinforcing bar
ISO***1: ***8, UKAS
Opening: *5mm ~ **0mm
Length: 1m ~ *4m, width: 1m ~ 3m
Wire diameter: 5mm ~ *6mm
Steel Bar Welded Wire Mesh Panel is made of superior quality
steel bar, with flat even surface, firm structure. This process
technology is one of the ten new construction technology in ***5.
It is widely used in construction reinforcement, the ground for
the tunnels, bridges, highway, airport and wharf, wall, etc.
Features of reinforcing mesh
The unique deformed wire pattern (curry pattern) offers superior
bonding, improved stress distribution and crack-width control
Ferro-Fabric is available in a wide range of diameters and
apertures. The products can be bent to shape as required
Manufactured from hard drawn wire (smooth) and cold rolled wire
(deformed)
All intersections are resistant-welded thereby not reducing the
tensile strength of the wires
Mesh has an average shear strength equal to *0% of the wire
strength
The wire used has physical properties which are rigidly
controlled to produce mesh with maximum weld strength combined
with ductility
The steel specifications allow for cold rolled wire with a
minimum ultimate tensile strength of **0Mpa and a high resistance
to fatigue
Mesh is available in black (pre-galvanised) and galvanised sheets
or rolls
Also available on request: Plastic coated and hot dipped
(galvanised) mesh
Quality Control
Reinforcing mesh is produced to highest quality standards and
complies to ISO ***2. Thorough testing of wire strength, welds
and aperture sizes is continuously performed at all stages of the
manufacturing process. Final inspections ensure that highest
standards are maintained.
Standard Sizes
Reinforcing mesh is available in rolls (*0m x 2, 4m) and sheets
(6m x 2, 4m), manufactured according to standard sizes. Wire
diameters vary from 3, *5mm to *2mm. Mesh aperture can be as
small as **0mm x **0mm.
Special Mesh
Specialized machinery is used to produce weld mesh with
non-standard aperture sizes. The spacing of wires in either
direction is variable between *5mm and **0mm. Customized mesh is
available on request according to specifications provided.
The Reinforcing Mesh Data Sheet
Standard sizes of welded mesh fabric
Specifications: Sheets: 6m x 2, 4m or Rolls: *0m x 2, 4m
Based on SABS ***4/***6 specifications for welded steel fabric
for concrete reinforcement
| 国家: |
China |
| 型号: |
rib reinforcing bat-s
|
| 离岸价格: |
( Negotiable ) （面議）
获取最新报价
|
| 位置: |
china |
| 最小订单价格: |
- |
| 最小订单: |
2 Ton |
| 包装细节: |
in bulk or as your request |
| 交货时间: |
20days |
| 供应能力: |
10000 Ton per Month |
| 付款方式: |
Other, L/C, T/T |
| 產品組 : |
rib reinforcing bar
|
