ALUMINIUM PROFILE :
SOUND PROOF
MOVABLE AND FOLDING :
FIRE RESISTANT
详情
SLIWALOperable wall
Shall be 100 Series (80mm thick panel) as furnished and
installed by an authorised representative ofSLIWAL.
The operable wall
panel construction and finish materials shall consist of Class A
rated materials in accordance withSLIWAL Standards. Operation: Partitions shall be
top supported, manually operated panels stacked in an area
nominated in the plans. When closed, the operable wall shall
provide a complete sound retardant barrier. No floor track
shall be used.
Track
: The tracks are made from
extruded 6063 - T5 anodized aluminium. The track housing shall
utilize grooves and interlocking steel pins for positive alignment
of adjacent track sections, and shall be reinforced overhead
by drop rod brackets. Aluminum track housing shall include an
integral nut slot to accept a hardened square nut for
attaching each drop rod bracket to the top of the track.
Trolley :
SLIWALCentre/ Side /Remote
stacking system with a Two wheeled nylon trolley made with the base
Material of POM 45 tempered steel shall be used as per approved
stacking method.
Aluminium
trim: The panel trims will be
standard series with exposed Aluminium trims of 15mm thickness
finished in 6063 - T5 Anodized Aluminium shall be used. Panels: The Panels will
be made from 12mm MDF boards and shall be 100mm thick and
1230mm maximum width, made to the appropriate acoustic rating
and structural backing and mounted in full perimeter extruded
aluminium frames with interlocking corner construction .The panel
faces shall be finished with selected material.
Basic Panels shall be equal in
module.
Approx. Weight kg/ square
metre :
40kg
Maximum
height
: 6000mm.
Panel Surface
Finish: The panel surface will be as
per the clients requirement finished either inSliwal factoryChinaor by others .
Rectractable
mechanism: The top and bottom rail
of each panel shall incorporate an extruded aluminium box section
mechanical seal manually operated by a handle inserted in the panel
stile, turning the handle through 45 degrees shall simultaneously
extend or retract the top and bottom seals through an steel
and spring mechanism which shall firmly hold the seals in the
retracted or extended mode. Single crank type
mechanisms shall activate floor and head seals.
Seals
:vinyl seal of butane rubber will
be used as top and bottom and as well as closure seals for the
operable wall system.Retractable seal drop will be 23mm.
Magnetic
Strip: Ferrite plastic magnetic
material will be used in between aluminium profiles to enhance
acoustic performance of the wall.
Stacking
:The
panels will be stacked as per the agreed method and in accordance
with the architetural plan. Centre stacking arrangement will be
utilized for the subject project.
Closures: Final acoustic
closure of the operable wall shall be effected by
either:
A panel equipped with a
telescopic closure.(Expanding panel)
A full height door panel with a
bulb seal.
Jambs: The end panel
of the opening opposite to the closure shall be fitted with
Bulb Seal an hollow extruded vinyl Seal, the Seal shall
protrude 10mm beyond the end of the panel and shall be capable of
compensating for minor variations in wall surface which it
abuts.