Salt Mist Test Chamber(Salt /Temperature /Humidity)salt spray chamber

详情

The purpose of salt spray test is to assess the salt spray corrosion resistance of products or metal materials, and the salt spray test result is the judgment of product quality, its judgment result is correct and reasonable, is the key to correctly measure the salt spray corrosion resistance of products or metal. The evaluation methods of salt spray test results include: rating evaluation method, weighing evaluation method, corrosion occurrence evaluation method, corrosion data statistical analysis method.
1. The rating method is to divide the percentage of the corrosion area to the total area into several levels according to a certain method, and take a certain level as the basis for qualified judgment, which is suitable for the evaluation of plate samples;
2. Weighing method is a method to weigh the weight of the sample before and after the corrosion test, calculate the weight of the corrosion loss to evaluate the corrosion resistance of the sample, which is especially suitable for the evaluation of the corrosion resistance of a certain metal;
3. The determination method of corrosion occurrence is a qualitative determination method, which determines whether the product has corrosion phenomenon after salt spray corrosion test. Most of the general product standards use this method;
4. The statistical analysis method of corrosion data provides a method for designing corrosion tests, analyzing corrosion data, and determining the confidence of corrosion data. It is mainly used for analyzing and analyzing corrosion conditions, rather than for determining the quality of a specific product.If you need more models about our test equipment, please reference our chamber-testing（.）com 
Feature 
1.Structure of Salt Mist Test Chamber: with enclosure is a fully anti-corrosion structure, made of multi-layer fiberglass reinforced polyester resin, and constructed with corrosion-resistant materials.
2.Unique design: Large spraying area and high flow rate, resulting in shorter spraying time compared to fogging the solution under salt spray function.
3.Custom nozzle: Specific nozzles evenly spray the solution onto the test sample, and the solution flow rate can be adjusted.
4.The nozzle is installed on an independent module, making it easy to remove when fogging function is enabled.
5.Programmable touch screen controller allows for operation in both Chinese and English, and enables data collection.
6.Standard test specimen racks are provided, capable of accommodating flat samples. For oversized and heavy three-dimensional samples (such as automobile hubs and engine components), grid kits with the same height as the support can be used. The enclosure is structurally robust, allowing for even distribution of the load.
7.The spray on/off time can be programmed directly to better control the corrosion rate.