SCM series Super-micro mill

详情

Working principleThe motor drives the main shaft and different turntables through the reducer. And the turntable rotates with more than ten rollers on the ring. The bulk materials will be lifted to the storage chamber by the elevator after being crushes be the hammer crusher. The vibrating feeder will transport materials evenly to the middle of the top layer. Then, materials will be thrown to the brim by centrifugal forces and fall down. When falling, the materials will be crushed, compressed and grinded by the rollers top to down. The centrifugal blower draws the air into the machine and blows the coarse powder, which has been through the three-time grinding, to the separator. The turbine in the machine will make the unqualified powder fall down for regrinding while the qualified powder will be blown to the cyclone collector and then be discharged as finished products. And the air flow, which still carries some dust will be cleaned by the dust cleaner and then be released.
 

Features

• High efficiency: With the same finished fineness, the SCM super micro mill has an output higher than that of the air flow mill or grinding mill by *0%.
• High reutilization rate: For the same fineness and raw materials, the wearing parts of this mill can last for a much longer time than that of the impact crusher or the turbine crusher, which could be more than one year.
• Good stability: There is neither screw nor rolling bearing in the chamber so that there is no abrasion on bearings or sealing parts, nor the screw loosening.
• High fineness: The fineness could reach d*7€°¤5um for the first time.
• Environmental protection: The dust cleaner and silencer is helpful to reduce the noise and pollution, which could meet the National Environmental Protection Standard.