详情
Introduction
Sterilization in an autoclave is the safest way for prevention of
infections. After sterilization, however, care must be taken that
instruments are not contaminated again. The SEALING
MACHINE-SEAL**8e can effectively seal sterilized instruments so
that they are stored while being safely protected against
contamination. Without great physical effort, these two models
produce optimal sealing seams *0 mm wide, with precise sealing
pressure. The German standard DIN ****3 specifies sealing seams
at least 8 mm wide. The working table is integrated in the
housing of the device.
After the operator switches on the power, it takes approx. 2
minutes until the cold unit heats up to operating temperature.
When the signal lamp goes off, this means that the SEAL**8 is in
the ready mode and can go to work. When the operator turns the
crank, this presses the pressure bar against the heated aluminum
rail. After only 2 seconds, the sterilization wrapper has been
properly sealed in accordance with relevant standards, with a
sealing seam of *0 mm width.
Features:
- Maximum Sealing-Sealing temperature adjusts automatically when
voltage changes.
- Non-corrosive body-the device is made of stainless for easy
cleaning.
- Sharp cutting blades-two cutting blanes are installed to cut
evenly.
- It is made of sterilization paper and polypropylene, coated
with thermal chemical indicator.
- It is used to bag instruments for sterilization. Instruments
will remain sterile for a long time.
- There are different widths of 5cm.7cm and *0cm to best suit
instrument sizes.
| 国家: |
China |
| 型号: |
sealing machine
|
| 离岸价格: |
（面議）
获取最新报价
|
| 位置: |
- |
| 最小订单价格: |
- |
| 最小订单: |
1 |
| 包装细节: |
- |
| 交货时间: |
7 to 10 days |
| 供应能力: |
500 |
| 付款方式: |
PayPal, Money Gram, Western Union, L/C, T/T |
| 產品組 : |
- |
