slitting line machine

详情

Material specification
A. Mother Coils Specifications For This Slitting Line:
a. The slitting is design for slitting of CRGO & CRNGO Electrical Steel Coils
b. Material Tensile strength:        σ_b≤**0Mpa, σ_0.2≤**0Mpa
b. Material thickness: 0.***0.35mm
d. Coil width     ******0 mm (max.)
e. Coil inside-diameter       Ф***-Ф**0mm
d. The coil outside-diameter    ***0mm (max)
e. Coil weigh     About 5T (Max.)
B. Finished Product / Slit Coils Specification:
a. Coil inside-diameter  Ф**8mm ±*0
b. Coil outside-diameter ***0mm (max)
c. Coil weight About 5T (Max.)
d Width tolerance ±0.*0 mm (when new cutter shearing is 0.*5mm)
e. Slitting width        *0mm (min)
f. Number of strips    10strips (when thickness less than 0.5mm)
g. Clearance between slitting Cutters and spacers: ≤0.**5 mm, clearance between slitting Cutters inside-diameter and main slitting shaft outside-diameter: ≤0.*5 mm. This is to ensure proper slitting quality of coils.
C. Equipment Specification with Slitting Lines:
a. Electric power supply **0V/*0 Hz/3PH
b. Electric power capacity About *5KW
c. Slitting speed ****0m/min
d. Slitting mechanism Variable frequency drive
e. Re-coiler director Underwind
f.  Control mode    PLC control, automatic speed track feeding 
g. Floor area About 10m length x 5m width
h. The slitting line direction From left to right 
   (Facing operating station, from left upload to right discharge)
i. Machine colourGreen (Standard)