Thermal Conductive Pad Made by Anpin Silicone

详情

Product Description

Thermal Silicone Rubber Pad  Tc-Pad AP****1 is a cost-effect thermally conductive, filled-polymer laminate, supplied on a reinforcing mesh for added electrical isolation, easy material handling and enhanced puncture, shear and tear resistance.

Thermal Pad  Tc-Pad AP****1 is suitable for JAPAN, INDIA, THAILAND, SINGAPORE and BELGIUM .

In computing and electronics, thermal pads (also called thermally conductive pad or thermal interface pad) are a pre-formed square or rectangle of solid material (often paraffin wax or silicone based) commonly found on the underside of heat sinks to aid the conduction of heat away from the component being cooled (such as a CPU or another chip) and into the heat sink (usually made from aluminum or copper). Thermal pads and thermal compound are used to fill air gaps caused by imperfectly flat or smooth surfaces which should be in thermal contact; they would not be needed between perfectly flat and smooth surfaces. Thermal pads are relatively firm at room temperature, but become soft and well able to fill gaps at higher temperatures.

As an alternative to thermal grease (sometimes called thermal transfer material), AMD and Intel have included thermal pads on the bottom of heat sinks shipped with some of their processors, as they are cleaner and generally easier to install. However, thermal pads conduct heat less effectively than a minimal amount of thermal grease.

Features

Thermal conductivity: 2.5W/m-K

Flame rating: UL**-VO

Good thermal conductive capacity

Electrical isolating

Good mechanical and physical performance

Applications

Telecommunications

LED lighting

Computers and peripherals

Motor driver control

Mass storage module

Power conversion
 

~ShangHai RAYMAC Precision Mechanical Co ., Ltd  is a design , manufacturing and trade integrated modern company , and our factory located in SuZhou,JiangSu province . Our plant specialized in manufacturing all kinds of related hardware electric accessories such as various types of spring and screws , EMI/EMC/RFI gasket rubber , stamping parts , NFC , machining parts ,ceramic materials ,  thermal conductive pad ,cabinet parts , CNC lathe parts , extrusion parts ,  conductive foam , gap pad series ,electronic metal reeds, protective film , adhesive tape ,insulator, TIM , mesh/fabric , etc . These products can be used for the automobile,communications equipment , automotive , commercial solutions , consumer, electronics , energy , manufacturing, transportation field .Most of these products already through ROSH , UL , ISO***1 certification test .Our factory works with everything from the raw material to the finished product , All products have to go through five checks if the whole manufacturing process by QC department .

All the related hardware electric accessories fall within the scope of our business activities , we shall be pleased to enter into direct business relations with you !