TOOKE D2600 2400 Lumens Scuba Diving Video Light Photographic Lighting Waterproof Flashlight 100m Underwater Torch

详情

Specifications:
Brand: TOOKE
Model: D***0
Waterproof: **0 meters
LED Parameters: Wide Light: 2 x CREEXM-L2; Red Light: 2 x XP-G/N4
Spot Light: CREEXM-L2; UV Light: 2 x **5nm
Runtime: *0mins
Beam Angle: **0°
Battery: 1*****0 Rechargeable lithium battery
Switch mode:Wide / Spot / Red / UV；SOS / Flash explosion
Material: Durable aircraft-grade aluminum T***5
Color: Black Premium Type III hard-anodizing Oxidation
Weight: **6g(with battery,underwater); **1g(with battery,on land)
Measurement: Diameter *5mm,Length **9.5mm
 
Operating Instructions
Turn ON: pressing the switch for less than one second.
 (Start wide light: **0% brightness)
Turn OFF: Pressing the switch for three seconds.
Switch mode: ( Wide / Spot / Red / UV)
                     (On-State) Pressing the switch for two seconds.
                     Wide light →Spot light →Red light→ UV light
Adjustment brightness: ( Wide / Spot / Red )
                   (On-State) Pressing the switch for less than one second.
                **0% → *0% → *5%
Turn On SOS:
 (OFF- State) Pressing the switch for more than two seconds.
Switch mode: ( SOS / Flash explosion)
                    (SOS- State) Pressing the switch for less than one second.
              SOS → Flash explosion
Turn OFF SOS:
                 (SOS- State) Pressing the switch for more than two seconds. 
Temperature Protection
When the inner temperature of flashlight is over the set value, in order to keep the inner temperature in the control range and the internal control circuit will automatic decrease the brightness of LED.
Battery Level Indicator
Blue Light: Battery level is **0% - *0% Green Light: Battery level is *9% - *5% Red Light: Battery level is *4% - 5% Flash Light: Battery level is < 5%
Caution: When the battery level indicator is flash red.
1. Can't switch the mode and adjust the brightness;
2.The brightness will be *0% output;
3. The light will automatic turn off *0 minutes later.
Automatic Overheat Protection
When being used at a temperature higher than *0°C , the light will automatically reduce the brightness by *0% to reduce heat and protect the components.
Charge the battery
1. Insert the battery into the charger, the positive electrode(+) of the battery and that of the charger should be on the same direction.
2. Plug the charger into the wall receptacle. The chargers indicator should turn to red signifying the charger has received power.
When the battery has finished charging, the indicator will turn to green.