U bend heat exchanger tubing

详情

U-Bend Tube Are Widely Used In Heat Exchanger Systems. Heat-Exchanger Equipment On The Basis Of Seamless Stainless U-Tubes Is Essential In Strategically Important And Critical Fields**-Nuclear And Petrochemical Machine Building.

LSI Start to Produce U Bending Tube Since ***5, When The First Tube-Bending Line Was Installed In LSI Factory.

The U-Bend Tube Comply With The Following Standards:

1.    ASTM A**8/ASME SA**8

2.    ASTM A**3/ASME SA**3

3.    ASTM A**6/ASME SA**6

Technical Requirements

Straight Tubes For Bending:

ASME SA **3; ASME SB **3; ASME A**9, ASME SA**8, ASME SA**9, etc.

Marking: Before Bending By Marking Machine All Over The Tube Length (Bent Section After Heat Treatment Without Marking)

Note: Marking is also possible After Bending On The Straight Parts Of U-Bending Tube.

U-Bend Tubes:

-TEMA RCB 2.*1 Standard Of The Tubular Exchanger Manufacturers Association (9th Edition).

-ASTM A**8/ASME SA**8 Standard Specification For Welded Tubes Of Austenitic Corrosion Resistant Steel Grade Designed For Feed Water Boilers.

-ASTM B**3/ASME SA**3 Standard Techinical Requirements For Tubes Of Nickel And Nickel Alloy For Condensers And Heat Exchangers.

Bending Radius: From 1.5*OD(Outside Diameter) To ***0mm

When Ordering Tubes With Radius less or equal to 1.5*OD, It Is Necessary To Agree Precision Of Geometrics.

Straight Tubes Maximum Length(Before Bending): ****0 mm.

Leg Length: Min 1 Meter, Max. ****0 mm (For Max R=***0mm)

Note: Other Size Are Available Upon Agreement.

Heat Treatment: Stress Relieved After U-Bending (Bending Area Plus **0MM For Each Leg).

Hydrostatic Test After U Bending: Maximum Test Pressure **0 Bar, Soaking *0 Sec. With Dematerialized Water. Compressed Air Cleaning After Hydro-Test.

Packaging: In Strong Transport-Worthy Pre-fumigated Wooden Boxes Of Corresponding Dimensions For Each Tube Length, Radius, Diameter, According To PO Requirements As well as Wrapped In Polyethylene Films With Soft Plastic Caps On Both End of Tube.

Lord Steel Industry Company Limited

Many Solutions, One Decision Here