UNION or OEM Three-division line array main loudspeaker Professional Speaker Professional Audio

详情

The compact Y8 linear array speaker is used to compose vertical arrays. The passive dual-frequency design is adopted, with two 8" drive units in dipole arrangement and a 1.4" compression drive unit with wave converter installed in the center. The compact horn geometry combined with the advanced bass reflector port design provides full bandwidth ultra-low frequency output capability. This high-performance linear array module provides controlled *0° horizontal direction down to **0 Hz. Its mechanical and acoustic design ensures a vertical array of up to twenty-four speakers with a vertical tilt Angle that can be adjusted from 0° to *4° accuracy. The speaker can be combined with a Y8 speaker or with a Y*2 and/or Y-SUB speaker to form a vertical array. The speaker box adopts waterproof plywood, impact-resistant and open-air protective paint PCP (polyurea box protective paint). The front panel of the box is protected by a sturdy metal mesh and lined with sound transparent foam. There are handles on each side panel and two recessed handles on the rear panel. The box is equipped with a three-point lifting device.

System data
Frequency response (*5 dB standard) : *0 Hz**8 kHz
Frequency response (*5 dB stop mode) :**0 Hz**8 kHz
Maximum sound pressure (1m, free sound field)
D6: **4 dB sound pressure level
D*2:**7 dB sound pressure level
D*0:**9 dB sound pressure level
D6/D*2/D*0 Number of boxes per channel :2

Speaker data
Nominal impedance: 8 ohms
Power handling capacity, low frequency (RMS/ peak *0 ms) :**0/***0 watts
Nominal diffusion Angle (horizontal) :*0°
Angle setting: ***4 ° (step is 1°)
Components :2 8" drive units with neodymium magnets,1.4" outlet compression drive units
Passive frequency division network
Connection :2 NLT4 F/M
You can select two NL4S or two EP5s
Size, weight
Dimensions (H x W x D) :**7 x **0 x **5 mm
Weight: *0.5 kg