详情
used lubricant oil recycle machine
Because the waste oil contain too much contamination,
including non-hydrocarbon, alkene, polycyclic aromatic
hydrocarbon, metal hydronium, impurities, metal particles,
asphaltene and colloid etc. and due to the traditional technology
only can refine the waste oil to base oil, can't use directly, so
our company is researching the new technology about distilling
equipment, which can distill all kinds of waste oil into clean
oil, easy to operation, and the lower operation
cost.
1.Working principle of used lubricant oil recycle
machine
This equipment adopt physicochemical actions to
polymerize, passivate, absorb and eliminate impurities and
harmful contamination. We research a new chemical alkaline
complex catalyst, which can restore and regeneration the Waste
oil to clean oil, save the component of the oil.
2. Advantage of used lubricant oil recycle
machine
It's easy to produce waste residue and bad smelling
by traditional vitriol distilling, which will bring potential
secondary pollution, moreover, it's easy to change the color to
black and produce the odor due to the recycled oil react with the
oxygen. But after we use the alkaline complex catalyst refines
the oil, the recycled oil haven't change the color and haven't
create the odor. What's more important, you can use the resid to
be as the fuel to heating the oil, without any pollution. And the
equipment is easy to operate, only **2 workers can control the
equipment.
3. Main components of used lubricant oil recycle
machine
a. Catalyst system: Catalyst Reactor,
blender;
b.. Chemistry treatment system: Chemistry reactor,
blender,oil pump
c. Heating distilling system: distilling tower,
distilling kettle, heater, circle pump;
d. Cooling system: refrigerating equipment, water
pump, water tank, cooler I,cooler II, Condenser;
e. Vacuum system: Vacuum water receiver, vacuum pump,
vacuum cooler
f. Degasification system: vacuum exhauster, exhaust
fan, degasification plant, water pump,
radiator,deodorizer.
g. oil storage system: distilling storage
tank
h. Control system: all kinds of gauge( vacuum gauge,
pressure gauge etc.) and electricity controller
tank
4. Working Principle of used lubricant oil recycle
machine
A proposal for processing waste lube oil and
industrial oils, using high vacuum distillation technology is
presented here. The various steps involved in the projects are
given below.
Step1: The waste oil is pre-treated and then send to
chemical processing kettle and react with catalyst.
Step2: This waste oil is approx **0 degree at
0.**8Mpa to have water and some light fractions
separated.
Step3: The temperature is keep rising up to
******0degree at **0Pa , the lighter fractions such as gasoline,
diesel are distilled and cooled and then stored in diesel
receiving tank.
Step4: The undistilled waste oil subjected to high
vacuum, medium temperature in the heated distillation plant, the
light base oil fraction is distilled and cooled and then
collected in the light base oil tank( above **0degree and at a
pressure of **0Pa). The distilled oil will have a viscosity of
higher than SN**0 at ambient.
Step 5: The undistilled waste oil subjected to high
vacuum, high temperature in distillation plant, the heavy base
oil fraction is distilled and cooled and then collected in the
base oil tank ( above **0degree and at a pressure of **0Pa).
Distilled oil approximately higher than SN**0 in
viscosity).
Step6: The distilled oils are clean oil generally no
need further treatment, they are going to be blended with
additives to get finished oils for the automotive and industrial
applications.
Step7: The final residue is semi solid at ambient and
can be processed for manufacturing asphalt, finished to make
off-speck heavy fuel oil or to make greases for slow moving
equipment.
5. Features
1. Easy to operate, low operation cost
2. Environmentally friendly, without secondary
pollution.
3. The equipment can recycle gasoline oil, diesel oil,
engine oil, rubber oil and other lubricant oil to clean
oil.
4. High quality refined oil, no any discoloration caused by
oxidation, no any bad smelling.
5. Low cost contain:
1) only need the catalyst chemical, the cost is less than
US$*0 to refine one ton waste oil.
2) Heat consumption: **5 kcal per ton waste oil
3) Power consumption: *0Kwh to recycle 1 ton waste
oil
6. High degree of automation.
|
The detail of recycled light oil and heavy oil
|
|
item
|
Heavy base lube oil
|
Light base lube oil
|
|
appearance
|
lucidity
|
lucidity
|
|
color ≤
|
1.5
|
1
|
|
Viscosity(*0degree)mm2/s
|
*9.*7
|
*6.*6
|
|
Viscosity index ≥
|
*6
|
*5
|
|
anti- oxidation **0degree,
min ≥
|
**0
|
**0
|
|
de-emulsification, 5degree,
min
|
5min
|
5min
|
|
Flash point (opening)degee ≥
|
**8
|
**4
|
|
Pour point degree ≤
|
**2
|
**6
|
|
Neutralization value mgKOH/g ≤
|
0.*2
|
0.*2
|
| 国家: |
China |
| 型号: |
DIR
|
| 离岸价格: |
( Negotiable ) （面議）
获取最新报价
|
| 位置: |
China |
| 最小订单价格: |
- |
| 最小订单: |
1 Set |
| 包装细节: |
packed in strong wooden case, it is suitable for long distance transport |
| 交货时间: |
40 workdays |
| 供应能力: |
100 Set per Year |
| 付款方式: |
L/C, T/T |
| 產品組 : |
lubrication oil purifier
|
