离岸价格
获取最新报价|
1 Set Minimum Order
国家:
China
型号:
HB
离岸价格:
位置:
-
最小订单价格:
-
最小订单:
1 Set
包装细节:
steel frame packing
交货时间:
35days after receiving 30vanced payment orL/C
供应能力:
30 Set per Month
付款方式:
L/C, T/T
联系人 Ms. lu
No.7 Yangshan Industrial Park, Huishan District, Wuxi, Jiangsu
1.Light duty column & boom manipulator is used for welding the longitidinal seam and circular seam
of the tank, vessle, boiler, and water tank. Widely used in oil and gas fileds.
2.Combined with the tank turning rolls, it can be a welding center.
3.This longitudinal welding center is composed of welding manipulator, rotator, SAW welder.
4.SAW weldingwith high efficiency and nice appearance; it is suitable for middle and heavy plate welding.
5.It can be widely used for petrol chemistry pipe welding, shipbuilding, metallurgy, boiler industries.
|
Type |
Heavy-duty |
Middle-duty |
Light-duty |
|||
|
8*6 |
5*6 4*5 |
3.5*5 3*4 |
2*2 |
|||
|
Effective stroke of vertical boom-mm |
***0 |
***0 |
***0 |
***0 |
***0 |
***0 |
|
Effective stroke of cross boom mm |
***0 |
***0 |
***0 |
***0 |
***0 |
***0 |
|
Suitable diameter of cylinder-mm |
********0 |
********0 |
********0 |
*******0 |
*******0 |
*******0 |
|
Rotating angle of the vertical boom (°) |
±**0° |
±**0° |
±**0° |
±**0° |
±**0° |
±**0°(manual) |
|
Up and down speed of cross boom-m/min |
0.9 |
1 |
1 |
1 |
1 |
0.3 |
|
Expansion speed of cross boom-m/min |
0.***1.2 |
0.***1.2 |
0.***1.2 |
0.***1.2 |
0.***1.2 |
0.***1.2 |
|
Forward and backward speed of the trolley-m/min |
1.5 |
1.5 |
1.5 |
1.5 |
1.5 |
1.5 |
|
The center distance of the trolley track-mm |
***8 |
***0 |
***0 |
***0 |
***0 |
**0 |
Positioner generally consist of a table which can be rotated manually or be power driven at variable speed for automatic welding.
The tables can also be manually tilted through **5 degrees from the horizontal or again power tilted through **5 degrees to ensure that the work piece is placed in the optimum position for down hand gravity welding.
Some welding positioners such as "rotilting" or "cradle" type positioners allow the work piece to be tilted through **0 degrees for the special applications which they have been designed to assist the fabricator.
Welding positioners are built in all capacities from a few kilograms up to **0 tonnes - the larger positioners being used predominately in the conventional and nuclear power industries.
The tables can vary in diameter from a few millimeters up to *2 metres, especially by incorporating cruciform arms mounted off the table.
Table drives are nominally equipped with variable speed drive to work with the automatic welding heads mounted on column and boom manipulators.
The tables are normally all equipped with earthing arrangements to protect the drive and bearings from possible damage by yhr electrical current from the welding process.
Larger capacity positioners are all equipped with slewing rings with integral gear to support the table with its load and to mount the rotation drive in the best position.
Positioners can also be equipped with hydraulic cylinders which are used to elevate both the table up and down and the tilting of table where the fabricator wishes for more flexibility in the handling of work pieces.
Nowadays positioners are seen in all fabrication work shops to assist the operator in handling fabrications large or small for semi automatic or automatic welding in the safest possible mode which is obviously very important given the health and safety constraints we all now work within.
We have a wealth of experience with welding positioner of all sizes.
Shown below is a heavy duty welding positioner but our range is from **0 kgs up to **0 tons for the nuclear power industry.
| 国家: | China |
| 型号: | HB |
| 离岸价格: | 获取最新报价 |
| 位置: | - |
| 最小订单价格: | - |
| 最小订单: | 1 Set |
| 包装细节: | steel frame packing |
| 交货时间: | 35days after receiving 30vanced payment orL/C |
| 供应能力: | 30 Set per Month |
| 付款方式: | L/C, T/T |
| 產品組 : | automatic welding manipulator |
