ZR-150WD CO2 laser power supply with external LCD display screen for 2meter CO2 tube

离岸价格

获取最新报价

159 ~ 169 USD / Piece ( Negotiable )

50 Piece Minimum Order

国家:

China

型号:

zr-150wd co2 laser power supply

离岸价格:

159 ~ 169 USD / Piece ( Negotiable )（面議）获取最新报价

位置:

jinan china

最小订单价格:

159 per Piece

最小订单:

50 Piece

包装细节:

carton and foam

交货时间:

3-4 working days after payment received

供应能力:

4000 Piece per Month

付款方式:

T/T, D/A, D/P, Western Union

產品組 :

现在联系

Jinan Ruby Laser Technology Co., Ltd

China

免费会员

联系人 william

Jinan, Shandong

现在联系

详情

ZR***0WD LASER POWER SUPPLIES
1.This high voltage laser psu box terminal control is simple and adapted to high and low level signals. TTL level can be used to control the start and stop of laser power. At the same time, an abnormal protection switch was added to detect if the external water is ventilated or not.
2.This external potentiometer laser psu box selects H/L/P/G/IN/5V green terminal board to accept laser control signal and it has aluminum upper cover and base, galvanized sheet shell..
3.The analog signals of 0 to 5V or PWM signals can be selected for controlling and regulating this external potentiometer laser psu box's output laser power.
4.This external potentiometer laser psu box can adopts external LCD digital display module by network cable,which can show constant current of **0w laser psu box's working current,working statues and failure code. It is very good function for both machine factory and machine users
5.The **0w laser psu box adopts two PCS fans for cooling. It use two Taiwans bearing which make the fas run for very long time.
6..This high voltage laser psu box has good grounding protection: It can provide very safe protection for operators
7.With open circuit protection, the external potentiometer laser psu box can work in an open-circuit state for a short time, which can avoid the damage of the **0w laser psu box caused by the bursting of the laser tube.
8.This **0w laser psu box has high efficiency and quick response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand **0W co2 laser tube.
9.The **0w laser psu box has LCD display module: (optional) .Because of it, it do not need to open the outside case. Operator can simply find ordinary code faults and output current at LCD display screen of **0W laser psu box
and easy remove the trouble. Also the output current can be adjusted by potentiometer on the LCD module
Specification

Input	Input voltage			AC*0V±0% (AC**0V specified while order)
	AC frequency			7~*0HZ
	Maximum power			***0W
	Maximum current			4.5A
Output	Maximum output voltage			*0KV
	Maximum output current			*0mA (depending on the laser tubes of different manufacturers)
Efficiency				More than *0% (Full load)
Response speed				Not more than 1ms
Control lnterace				TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)
Insulation		lnput-output		AC **0V 1 minutes not more than 0mA
		lnput-shell		AC **0V 1 minutes not more than0mA
		Output-shell		Connection
Open Circuit Protection				Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)
Environmental Requested			Working temperature	*0℃~0℃
			Storage of temperature	*0℃~5℃
			Relative Humidity	Maximum *5%RH (non-condensing)
			Altitude	0,0 feet of work 0,0 feet of storage,dose not work
Cooling methods				Forced air cooling (fan cooling)
Dimensions (LxWxH)				0mmx1mmx**5mm

国家:	China
型号:	zr-150wd co2 laser power supply
离岸价格:	159 ~ 169 / Piece ( Negotiable ) （面議）获取最新报价
位置:	jinan china
最小订单价格:	159 per Piece
最小订单:	50 Piece
包装细节:	carton and foam
交货时间:	3-4 working days after payment received
供应能力:	4000 Piece per Month
付款方式:	T/T, D/A, D/P, Western Union
產品組 :	-