40A ESC for RC airplane (DL40A++)

详情

Place of Origin:China Shanghai Model Number:DL*0A++ Brand Name:PULSO OEM :Accepted Application:RC airplane Color:Clear or other color according to customer's request PULSO ESC (electronic speed controller) DL*0A++ for RC airplane toy Advance plus series (programmed by Prog-card) Model No. BEC LIPO NICD/NIMH DL*1A+ 2A **3 Cell ***0 Cell DL*2A+ 2A **3 Cell ***0 Cell DL*3A+ 2A **3 Cell ***0 Cell DL*3A++ 3A **4 Cell ***0 Cell DLU*3A+ UBEC **6 Cell ***6 Cell DL*0A+ 2A **3 Cell ***0 Cell DL*0A++ 3A **4 Cell ***0 Cell DLU*0A+ UBEC **6 Cell ***6 Cell DL*0A+ 2A **3 Cell ***0 Cell DL*0A++ 3A **4 Cell ***0 Cell DLU*0A+ UBEC **6 Cell ***6 Cell DLU*0A+ UBE **6 Cell ***6 Cell DLU**0A+ UBEC **6 Cell ***6 Cell I. Features: 1. Easy setting; easy operation. 2. Safe start-up system. (The motor wont be started no matter which position the throttle stick is on when the battery is connected). 3. Automatic power cut-off. (When the motor stops rotating or the radio signal loses for more than 3 seconds, the power will automatically be cut off.) 4. BEC provides power to receiver and servos (for ESC with BEC). 5. High rate switching Pulse Width Modulation (PWM): 8KHZ. 6. Over-heat protection. The power will be cut-off as it is heated up to **0. 7. Over-voltage protection. The motor wont be started if the voltage is higher than *8V (Expect for the OPTO series.) 8. Low-voltage cut-off. 3.0V/2.7V (selectable) for Li-ion/Li-polymer battery; 0.9V/0.7V (selectable) for Ni-CD/Ni-MH battery. 9. Timing mode.: Timing low mode**- providing highest efficiency suitable for motors with 2, 4, 6 poles; Timing high mode**-providing highest rotation speed & biggest current suitable for motors with 6 or more poles and outrunning motors. *0. Programming Card: Programming can be done on the programming board easily. II. Factory Default Setting: 1. Brake off. 2. Timing high**-for outrunning motors and motors with more than 6 poles. 3. Throttle curve***-linear. 4. Battery type: Li-ion/Li-Polymer battery. 5. Cut-off voltage: cut-off voltage low. 2.7V for Li-xx battery. 6. Cut-off type: cut-off soft, reduce the power when the voltage drops to the cut-off voltage. III. OperationFor ESC with Advance plus Prog-Card 1. Connection (Connect the motor & ESC / Connect the receiver & ESC) 2. Using of Advance plus Prog-Card and Start-Up.