532nm 30mw 50mw 80mw 100mw 120mw 150mw Green Laser module With TTL modulation For laser stage lights

详情

Output wavelength: **2nm
 
 
 Output power: *5mw**0mw
 
 
 Spot ovality> 0.9
 
 
 Light height *5mm
 
 
 Divergence angle <1.2mrad
 
 
 Operating Temperature 0 to *0 
 
 
 The modulation mode TTL level: (0 ~~ *0K)
 
 
 Input voltage: DC / AC *2V
 
 
 Laser Size: *5 (L) X*0 (W) X*0 (H)
 
 
 Power Dimensions: *6 (L) X*0 (W)
 

Similar product recommendation

Fine spot:

G*0       **2nm(*0mW**0mW)********-$*8/pcs   

G*0       **2nm(*0mW**0mW)********-$*8.8/pcs   

G*0       **2nm(*0mW***0mW)******-$*6.6/pcs   

G**0       **2nm(**0mW***0mW)***-$*0/pcs   

Crude spot:

G*0C       **2nm(*0mW**0mW)********-$*5/pcs   

G*0C      **2nm(*0mW**0mW)********-$*8.5/pcs   

*If you buy more than *0pcs, you can contact us e-mail request a new quote.

Instructions for use:
Plug in the power plug and then turn on the switch. Energized after *0 minutes of power into a stable state. Switching power supply should be more than 5 seconds interval, or fragile laser.
2. Use the power board should be placed on an insulator or overhead, or roasted bad laser power. The laser and the power cable at the same time not let received a large external force, so as to avoid the lasers internal cable disconnection.
3 for laser cooling, place the laser fixed on a flat metal plate.
The Note. Dust, not much of a place in the dust, if the laser is not a long time in the light hole at Paste dustproof paste.

Note:
1 laser and power should avoid the the strongly collision and vibration.
Do not direct laser irradiation to the human and animal body, especially the eyes, and light-sensitive organ, or likely to cause injury.
Do not dismantle lasers and power, where unauthorized demolition is not within the scope of the warranty of the Company.