banner /canvas Hot Air Welding Machine with Leister air pressure gun

banner /canvas Hot Air Welding Machine with Leister air pressure gun
 

1.Introduction:

Thank you very much for choosing our Automatic TOP***0C Hot Air Welder. We believe that this will be your best choice for your business. This equipment is designed professionally for seaming PE , PVC and painting banners.

To help you understand the characters features of this equipment and know how to operate safely and keep in good condition etc. We give you THE MANUAL OF INSTRODUCTIONS for your reference. Although the machine is produced well and passed the strict quality examination in our factory before we deliver the machine to you, the effects of the function will be absolutely caused by the improper operation or without complete maintenance. For the reason of safety and the excellent performance of the machine, please read and follow the directions before operation. Please keep in mind that all the danger would be caused by carelessness and not reading the manual carefully.

2.General instruction for safety:

Warning: The basic principal of safe protection should be followed to reduce the danger of fire in disaster, electric shock and personal harm. Please pay attention to the following items carefully before operation.

1.Keep the working place clean. Messing up and the disorderly working place cause disaster 
2.Choose the work place carefully and use the machine in a bright and dry circumstance.
3.The electricity, controlling box and protective facilities have to be in the proper order after finishing daily work. The electrical power supply has to be switched off definitely.
4.The machine has to be stopped before gets maintenance or replacing the parts.
5.Use standard or indicated tools when dismantling or replacing parts.
6.For safety and the long life of the machine, please do not let the machine operates overtime.
7.If any special incidents happened, please stop the machine first for repairing, And do not deal with the special incident with improper procedures.
8. If the machine is operated on land, keep the work place clean and no dust there. If dust or something blocks the inhaling filter of heater, the heating wind can not come cut adequately and then temperature inside of filter will rise to let the heater burn down.
Tips:For first user,we can use waste banner to test and find proper temperature,we can do like this:take a small banner close the nozzle,if the banner hot melt quickly,it means,the temperature is OK,it not strong or burnt,we can increase or reduce temperature.we can also write down the temperature for this thickness of banner as sample.in next welding,based on this temperature.we just need to increase or reduce the temperature depends on thickness of banners.check the welding result:

3.Moving,Dismantlement,Installation,Cleaning:

1. Any part of this machine being bumped of fallen can cause some damage impossible to be repaired.So please pay attention to carry it.It is suggested to move the machine by manpower and put it down carefully.
2. Please check if there is damage or missed parts after unpack the machine.Any problem, please contact us or the local agent immediately.
3. The place for installation must be flat and the floor is strong enough to support the machine and moreover, the installation place should close to power supply.
4. Keep the installation place no dust and avoiding sunshine.
5. Please sweep away the anti-rust oil from the machine with detergent and re-lubricate with light lubricating oil after installation.

4. Connecting the power supply:

Connecting the electric wire to the reserved plug(AC**0V)of controlling box.

5 notice:

1. During operating, if the surface cloth is dissolved and scorched or the cloth are not sticked together, please stop to adjust the temperature or speed.
2. During operating,if the seaming part is not in right position, please stop to adjust fixing position.
3. During operating, make sure clothes are flat so that stick together smoothly.
4. The hot wind of heater cannot touch the press-wheel or the rubber of press-wheel is easy to be burned down.
5. Adjust temperature to zero before turn off the heater.Switch off after ***0 minutes.

6. Maintenance:
Take care the nozzle.Use brush to clean if there is dust or block in the nozzle or filter.

7.Specification:

Electric heating:***0W
Motor:*5w
Voltage:**0V/**0V 
Frequency:*0/*0HZ
Temperature scope:*****0 Degree
The thickness of material to be weld:0.**2mm.
Welding Area:**4cm
Working Temperature:**0degree(normally)
Specification: L:*0cm, W:*0cm, H:*8cm
Net weight:*0kg
Gross Weight:*4kg
Packing size:*8**7**0cm
Package: Hard Aluminum with carton outside