Our connecting rod is manufactured as per JIS standard.:The tolerance for the Centre Distance is 75 microns and the
Our connecting rod has precisely tested tensile and bending :The ends are most hard to withstand the rotating wear and te
详情
Connecting Rod is our exemplary presentation and
conforms to the Highest Quality and Performance standards. The
connecting rod is a vital link between the pistons
reciprocating motion and the crankshaft’s rotary motion, thus
being instrumental in changing the reciprocating motion to
rotary motion.
· The big end and the small end are granded in stages to
obtain the dimension and its clearances. By the process of Honing
the final mirror finish of the product with its dimension and
tolerances is reached. · Quality Control: · The Big and Small end dimensions of the Connecting Rod
is cross checked at the point of machining by the means of Air
Guages. A high degree of accuracy is achieved in this method. The
tolerance for the Centre Distance is *5 microns and the bore
diameter is 5 microns for best performance of the
product. · The Big end and small end of the connecting rod should
be of HIGH hardness and Strength as they withstand the highest
rotating wear and tear. The I-type shaft connecting them should
have high tensile and bending qualities. · Omoto Connecting rods manufactured as per JIS standards
with special attention to deliver High strength, Optimum grain flow
and close dimensional precision in the finished
products.
