离岸价格
获取最新报价100 ~ 600 / Set ( Negotiable )
|10 Set Minimum Order
国家:
China
型号:
IRA-HP58/1.8-20
离岸价格:
100 ~ 600 / Set ( Negotiable )获取最新报价
位置:
China
最小订单价格:
100 per Set
最小订单:
10 Set
包装细节:
carton
交货时间:
20days
供应能力:
100000 Set per Week
付款方式:
D/P, D/A, T/T
Heat pipe pressurized solar water heater features:
1.Adopts the best
conduction performance metal- heat pipe (copper).
2.Can be used all year round in the cold climate.
3.High efficiency, rapid warming. Heat pipe in vacuum tube could
transfer hot energy to cold water in pressurized solar water
heater tank rapidly.
4.The whole pressure of the system is up to 1.5kg/M2, the inlet
could connect the tap water directly, the max pressure can be
0.6Mpa.
5.No water in the tube, one tube broken don't influence the
system working.
6.The design for inner tank is reasonable and scientific, which
could hold **0, **0 times fatigue test without any damage.
7.Dual-purpose brackets for both flat and inclined
roof.
8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out.
Pressurized solar water heater working principle:
1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot.
3.No water in the heat pipe makes the whole system could bear pressure.
Model |
IRA-HP*8/1.***0 |
Material of out tank |
0.*1mm thickness color steel/ fluorine carbon steel |
Material of inner tank |
Food grade 1.0 mm thickness SUS**4 stainless steel |
Tank insulating layer |
*0mm thickness, *5kg/m³ high-density polyurethane foamed |
Inlet and outlet hole |
Female G 3/4 |
Max pressure |
0.9Mpa |
Solar collector tube |
3.3 Borosilicate glass with Al-SS/Cu coating *8x1,**0mm with heat pipe |
Thickness of glass tube |
1.6mm |
Vacuum tube tightness |
P≤0.**5 Pa |
Absorption |
as=0.***0.*6(AM1.5) |
Emission ratio |
εh=0.***0.*6(*0C±5C) |
Idle sunning property parameters |
Y=**0~**0m2.C/KW |
Average heat loss coefficient |
ULT=0.6~0.7W/(m2.C) |
Bracket |
1.2mm thickness of galvanized steel material,*8degree |
Structure of tank: |
6 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor. |
Welding: |
Argon arc welding |
Fastening pieces: |
Made of stainless steel screw |
Absorber area |
1.**4m² |
Heat pipe size |
Dia*4mm x *0mm length condenser,**0cm length in total |
Heat pipe material |
TU1 copper |
Heat pipe power |
>**0W/pcs |
Temperature tolerance |
from **5C to **0C |
Tube quantity |
*0 tubes |
Other Tube quantity |
8/*0/*2/*5/*8/*0/*4/*0/*6 tubes |
Tank capacity |
**0L |
Other Tank capacity |
*0/**0/**0/**0/**0/**0/**0/**0/**0L |
国家: | China |
型号: | IRA-HP58/1.8-20 |
离岸价格: | 100 ~ 600 / Set ( Negotiable ) 获取最新报价 |
位置: | China |
最小订单价格: | 100 per Set |
最小订单: | 10 Set |
包装细节: | carton |
交货时间: | 20days |
供应能力: | 100000 Set per Week |
付款方式: | D/P, D/A, T/T |
產品組 : | Heat pipe pressurized solar water heater |