high density polyethylene hdpe

离岸价格

获取最新报价

650 ~ 1100 / Ton

5 Ton Minimum Order

国家:

Hong Kong

型号:

film/extrusion/blowing/injection g

离岸价格:

650 ~ 1100 / Ton （面議）获取最新报价

位置:

China(mainland)

最小订单价格:

650 per Ton

最小订单:

5 Ton

包装细节:

25kg/PP bag, 20mt/20'ft container

交货时间:

Within 12 days after received the deposit or worka

供应能力:

3000 Ton per Month

付款方式:

T/T, L/C, Western Union

產品組 :

plastic&rubber raw material

现在联系

ZHONGAO(CHINA) IMPORT EXPORT LIMITED

Hong Kong

1888 信任点

2nd 年

联系人 tinaexport9119-cn.weady.062251

15 / b 15 / F Cheuk Nang, plaza 250 hennessy rd , Hongkong

现在联系

产品规格

Virgin HDPE granules:high density polyethylene hdpe Virgin and Recycled

详情

1,HDPE Resin Description:

PE sheet is also called Polyethylene sheet, and HDPE is a shortened name for High Density Polyethylene and available in two grades, **0 and **0 grade. The higher the HDPE grade number, the higher the density of the plastic is.

2,Characters:

physical and mechanical properties good, tearing strength high, tensile-strength is high, resist puncture, resist plant root ageing resistance , uvioresistant , endure oil ,salt ,acid and alkali, corrosion prevention, endure high and low temperature, innocuity, long using life waterproof , impervious, good dampproof, complete types, low cost , construct easily.

3,Classfication :

Virgin and Recycled

Grade: Film Grade , Extrusion grade,Blow molding grade, injection molding grade, etc.

4 ,specification:

HDPE cable material Property	Unit	Typical Value
Mass density	g/cm 3	0.**0.9
Melt flow Rate(*0 centidegree /2.6kg)	g/*0min	≤1.0
Tensile yield strength	MPa	≥*9.0
Flexural modulus	Mpa	≥**5
@*******************	%	≥**0
Impact Embrittlement temperature	centidegree	MAX ***8
Dielectric Constant	**0KHZ	2.*2
Dielectric Constant	1MHZ	2.*1
Loss Tangent	**0KHZ	MAX 0.***1
Loss Tangent	1MHZ	MAX 0.***1
Volume resistivity	OHM-CM	MIN 1x0 5
Application	Mainly used for the production of high toughness of the telephone,cable insulation material

1,HDPE Resin Description:

3,Classfication :

Virgin and Recycled

Grade: Film Grade , Extrusion grade,Blow molding grade, injection molding grade, etc.

4 ,specification:

HDPE cable material
Property

Unit

Typical Value

Mass density

g/cm 3

0.****0.**9

Melt flow Rate(**0 centidegree /2.*6kg)

g/*0min

≤1.0

Tensile yield strength

MPa

≥*9.0

Flexural modulus

Mpa

≥**5

Elongation

国家:	Hong Kong
型号:	film/extrusion/blowing/injection g
离岸价格:	650 ~ 1100 / Ton （面議）获取最新报价
位置:	China(mainland)
最小订单价格:	650 per Ton
最小订单:	5 Ton
包装细节:	25kg/PP bag, 20mt/20'ft container
交货时间:	Within 12 days after received the deposit or worka
供应能力:	3000 Ton per Month
付款方式:	T/T, L/C, Western Union
產品組 :	plastic&rubber raw material