Satin Finishing Plaster

It is a gypsum-based final coat finishing mortar which can be apply between 0-2mm thickness onto interior walls and ceilings by hand.

• With the fine particule structure, obtains silky and esthetic texture.
• The smooth surface provides saving which prepared for painting.
• A1 class non-combustible material.

It can apply on concrete, gas concrete, plaster, gypsumboard etc. surfaces.

• Ambient temperature must be at least +5oC.

• Sections should be closed which causes air-flow.

· Dry and hot surfaces should be wetted.

· Surfaces should be cleaned from subtances (dust, dirt, oil, paint, etc.) which are preventing adhesion of plaster.

· · Fill fresh water into a clean container according to amount of mixture will prepared, approx. 7lt Water / 10kg Atışkan Satin Finishing Plaster sprinkles to cover the surface of water.

· After waiting for 2 minutes, slurry is stirred until it becomes homogeneous.

· The mixture is ready to be used within 60 minutes.

· Ready mixture is applied from bottom to up and right to left, two-way scraping with steel trowel.

· Do not add any other material (lime, sand, etc.) into mixture.

· Avoid contact with skin and eyes. In case of contact wash with plenty of water.

Do not use any place except where application areas noted.

1kg/m2 Atışkan Satin Finishing Plaster for each 1mm thickness.

6 months for storage in closed bag and humidity proof conditions.