The battery is positive inside(over the lamp head) and negative
outside(tail).
The switch is at the tail, the switch function is the switch
function, the light press switch is the dimming function.
II. Description of the use of circuit boards
1, this shop flashlight adopts advanced steady pressure constant
current technology, can effectively solve the led torch to steady
pressure constant current request.
2. Special Reminder: a. Do Not overpressure, voltage does not
exceed 4.2 VB. Battery is straight forward, not backward, otherwise
it will burn board.
3. Warranty description: Open or processed circuit board no longer
warranty scope.
III. DESCRIPTION OF LITHIUM BATTERIES
1. Lithium Battery Characteristic: Lithium Battery and cell phone
battery charge way is completely different; Lithium batteries have
no memory, can be filled with time, do not overcharge.
2, the first charge 6 hours minimum, then according to the charger
green light can be, do not overcharge.
3, special hint wants to use to have overcharge-proof, prevent
back-up, prevent short circuit "Three Guard" charger;
4, do not use batteries for a long time, should be full of
electricity, normal three months or so again charge and
discharge;
IV. Description of the use of torches
1. When using the flashlight, choose according to the voltage and
battery requirements of the flashlight, do not use
indiscriminately, in order to prevent the burn circuit board,
different models, different voltage batteries do not use at the
same time.
2. In use, turn off the flashlight when its brightness changes
significantly to prevent the battery from being released.
3, heat dissipation skill: The flashlight in use process, want to
ensure heat dissipation. When the battery is required to be fully
charged, it is best to use the second gear first, so that the torch
lamp head and the battery can be extended product life! Do not
direct the light of the flashlight to the eyes, too bright glare,
so as not to affect vision, especially children.
V. Fault Repair
Check the battery: Make sure the battery is charged and loaded in
the right direction. Do not use different brands of batteries.
Check tail cover: make sure the switch is tight and in good
contact. Make sure that the copper column of the tail cover is in
good contact with the metal sheet of the pressure ring of the tail
cover.
国家: | China |
型号: | JRSB01 |
离岸价格: | 4 ~ 6 / Piece 获取最新报价 |
位置: | shenzhen |
最小订单价格: | 4 per Piece |
最小订单: | 100 Piece |
包装细节: | retail box |
交货时间: | 10days |
供应能力: | 10000 Piece per Week |
付款方式: | T/T |
產品組 : | GPS tracker |