sell solar collector(U pipe collector)

详情

Contact: himin*4 at hotmail dot com Model No: HUJ**6/*1,HUJ**2/*1,HUJ*1 6/*8,HUJ**2/*8,HUJ**6/*6 Standard: Solar Keymark, EN ****5 standard Description: Constitutes: vacuum tube , U pipe cooper ,fins, heat transfer fluid, header, insulation layer Solar Keymark certified U pipe solar collectors include: HUJ**6/*1,HUJ**2/*1,HUJ*1 6/*8,HUJ**2/*8,HUJ**6/*6,HUJ**2/*6 Absorb area:1.**2m*1.**2m2, 1.**6m2, 0.**2m2, 1.**6m2, 0.**0m2 Length of the tube: 1.6m,1.8m,2.1m Numbers of the tube: *2pcs, *6pcs Maximum pressure: ***0 kPa Operating pressure: **0 kPa Material of the cover tube: Borosilicate glass Transmission of the cover tube: *0% Outer diameter of the cover tube: *8mm Thickness of the cover tube:1.8mm Distance from tube to tube: *8mm Heat transfer fluid: Water-glycol Material of the fins: Aluminium Thickness of the fins: 0.3mm Material of the header pipe: Copper Number of header pipes: 2 Outer diameter of the header pipe: *5mm Inner diameter of the header pipe: *3mm Material of the insulation in the header: Polyurethane Thickness of the insulation in the header: average *0mm Sealing material: Silicon ruber The characteristics: 1. The vacuum tubes transform solar light into heat energy and then transfer the heat to the working media depending upon the fin and U-shaped copper pipe in the manner of thermal conduction. 2. There is no water in the vacuum tube,so the tube will not broken in the winter. 3. It has a smaller thermal loss,stronger adaptability and better performance of aging-resistant membranous layer. 4. Can operate with water pressure up to 0.6MPa 5. Can be combined with existing energy source 6. Storage do not need be installed above the collector 7. It can be combined with the architecture perfectly 8. Solar Keymark certified solar collector