详情
1) CERBACK Brand Ceramic Welding back
up tapes & strips for one side welding. These are used for ALL
kind of WELDING PROCESSES & for ALMOST ALL METALS, for One Side
welding. Welding processes such as SMAW, FMAW, GMAW, SAW, CO2, TIG,
MIG etc.
By using Weld back up strips,
Welding COST is saved approx *0 to *0% whereas welding TIME is
saved by *0%. RESULTS are **0% RADIOGRAPHIC WELDING. No Back
CHIPPING, No Back GRINDING or Gouging, No PURGING
required.
Weld back up tape consists various
profiles of Non Porous CERAMIC tiles for butt welding, Fillet
welding etc.
2) SIBACK - FIBERGLASS Backing
Tapes.
SIBACK is a high heat resistant aluminum
backing tape with a woven fiberglass having RED Center line for
easy location in root gap adjustment.
Very simple & easy to use. Just peel off
release paper from Aluminum. Stick Aluminum tape to backside
of the root gap on sheet, plate, pipe or vessel, adjusting center
line with Center of Root gap. The fiberglass, which is One
inch wide, covers the root gap and leaves no open air gap,
causing NO OXIDATION .
By using fiberglass weld back up tapes, Welding COST
is saved approx *0 to *0% whereas welding TIME is saved by *0%.
RESULTS are **0% RADIOGRAPHIC WELDING. No Back CHIPPING, No Back
GRINDING or Gouging, No PURGING
required.
fiberglass welding back up tapes are one inch in
width, pasted at center of *5 mm wide Aluminum tape coated
with temperature resistant acrylic
adhesive.
Fiberglass backing tapes are available in *0mil (1
mm) thick, *0 Mil (1.5mm) thick & **0 mil(3mm)
thick.
By
using WELD
BACKING TAPES:
· Increases
productivity, Root weld and fill in one
pass.
· Ideal
for stainless steel and alloyed metals, sheet, plate, pipes
and vessels.
· Imparts
X-ray quality back beads on root pass.
· Saves
argon gas as no purging will be necessary, resulting
Massive purge gas savings.
· Makes
process faster as it saves time in preparation and
assemble.
· Welds
one side only.
· Provides
incombustible, high temperature stability. More flexible,
low thermal conductivity, good thermal shock resistance, good
mechanical and chemical agents resistance, good electrical
properties.
· Saves
cleaning costs.
· Eliminates
weld defects, No re-welding & re-work.
· For
horizontal and vertical welding.
· No
Gouging or Grinding, Back chipping, No
Purging.
