H-Beam Welding Line

详情

General introduction This welding line for H-profile steel is a new technical product that integrates mechanical, electric, and pneumatic technologies. The machine, using advanced technology of single-arc double-wire welding, greatly increases the product efficiency. It consists of welding machine, position fixing machine and conveyer. After fixing the position for the web and two wings of H-profile steel, the welding machine can automatically located, clamp, adjust , weld, transport until finishing the all work. The automatic mode of this line greatly lowers the cost of manufacture. Main parameters a. work height: about **0mm b.dimension of conveyor: about ***0�****0mm c.dimension of main frame: about ***0 �***0mm d.hydraulic motor power: about 5.5KW H-profile specifications a. Main welding speed: *******0mm/min b. Inclination of H-profile steel : 8º(unilateral) c. Web thickness: **8mm d. Web width: *******0mm e. Web length: *********0mm f. Wing thickness: ***6mm g. Wing width: ******0mm h. Wing length: *********0mm working flow Put the wing panel on the conveyor**-oil vat for turning the wing panel work**-upright the two wing**-oil vat for turning wing panel reposition **-oil vat for lifting work**-wing panel lifting**-put the web panel on the conveyor **-oil vat for lifting descend **-web panel and two wing panels on the conveyor **-adjust them as requirement**-spot weld the head of three panel and let them to be H-profile